On Tue, 2016-01-05 at 18:20 +0530, Shubhangi Shrivastava wrote:
> This patch checks for changes in sink count between short pulse
> hpds and forces full detect when there is a change.
>
> This will allow both detection of hotplug and unplug of panels
> through dongles that give only short pulse for such events.
>
> v2: changed variable type from u8 to bool (Jani)
> return immediately if perform_full_detect is set(Siva)
>
> v3: changed method of determining full detection from using
> pointer to return code (Siva)
>
> Tested-by: Nathan D Ciobanu <nathan.d.ciob...@intel.com>
> Signed-off-by: Sivakumar Thulasimani <sivakumar.thulasim...@intel.com>
> Signed-off-by: Shubhangi Shrivastava <shubhangi.shrivast...@intel.com>
> ---
> drivers/gpu/drm/i915/intel_dp.c | 30 +++++++++++++++++++++++-------
> 1 file changed, 23 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
> index 0d58bfd..8a659ee 100644
> --- a/drivers/gpu/drm/i915/intel_dp.c
> +++ b/drivers/gpu/drm/i915/intel_dp.c
> @@ -4331,12 +4331,14 @@ intel_dp_check_link_status(struct intel_dp *intel_dp)
> * 3. Use Link Training from 2.5.3.3 and 3.5.1.3
> * 4. Check link status on receipt of hot-plug interrupt
> */
> -static void
> +static bool
Please expand the comment above to indicate what the return value of this
function is supposed to mean.
> intel_dp_short_pulse(struct intel_dp *intel_dp)
> {
> struct drm_device *dev = intel_dp_to_dev(intel_dp);
> u8 sink_irq_vector;
> u8 link_status[DP_LINK_STATUS_SIZE];
> + u8 old_sink_count = intel_dp->sink_count;
> + bool ret;
>
> /*
> * Clearing compliance test variables to allow capturing
> @@ -4348,12 +4350,20 @@ intel_dp_short_pulse(struct intel_dp *intel_dp)
>
> /* Try to read receiver status if the link appears to be up */
> if (!intel_dp_get_link_status(intel_dp, link_status)) {
> - return;
> + return false;
> }
>
> - /* Now read the DPCD to see if it's actually running */
> - if (!intel_dp_get_dpcd(intel_dp)) {
> - return;
> + /*
> + * Now read the DPCD to see if it's actually running
> + * Don't return immediately if dpcd read failed,
> + * if sink count was 1 and dpcd read failed we need
> + * to do full detection
> + */
> + ret = intel_dp_get_dpcd(intel_dp);
> +
> + if ((old_sink_count != intel_dp->sink_count) || !ret) {
I don't see the connection of the comment above with this. If the dpcd read
fails, the 'return false' will be reached regardless of the previous value of
intel_dp->sink_count. Did you intend to do something different or did I miss
something?
> + /* No need to proceed if we are going to do full detect */
> + return false;
> }
>
> /* Try to read the source of the interrupt */
> @@ -4373,6 +4383,8 @@ intel_dp_short_pulse(struct intel_dp *intel_dp)
> drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
> intel_dp_check_link_status(intel_dp);
> drm_modeset_unlock(&dev->mode_config.connection_mutex);
> +
> + return true;
> }
>
> /* XXX this is probably wrong for multiple downstream ports */
> @@ -5095,8 +5107,12 @@ intel_dp_hpd_pulse(struct intel_digital_port
> *intel_dig_port, bool long_hpd)
> }
> }
>
> - if (!intel_dp->is_mst)
> - intel_dp_short_pulse(intel_dp);
> + if (!intel_dp->is_mst) {
> + if (!intel_dp_short_pulse(intel_dp)) {
> + intel_dp_long_pulse(intel_dp
> ->attached_connector);
> + goto put_power;
It could be in a follow up patch, but I think its a good moment to get rid of
the goto put_power. The only thing they do is skip the 'ret = IRQ_HANDLED'
assignment now.
Ander
> + }
> + }
> }
>
> ret = IRQ_HANDLED;
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
