On to, 2016-01-07 at 10:15 +0200, Jani Nikula wrote:
> On Wed, 06 Jan 2016, Matt Roper <[email protected]> wrote:
> > Our attempts save/restore panel power state in i915_suspend.c are
> > causing unclaimed register warnings on BXT since the registers for
> > this
> > platform differ from older platforms.
> >
> > The big hammer suspend/resume shouldn't be necessary for PP since
> > the
> > connector/encoder hooks should already handle this. In theory we
> > could
> > remove this for all platforms, but in practice it's likely that
> > would
> > cause some regressions since older platforms with LVDS may have
> > incomplete PP handling. For now we'll leave the PCH save/restore
> > alone
> > and change the non-PCH branch to only operate on gen <= 4 so that
> > BXT
> > and future platforms aren't included.
> >
> > v2: Typo fix: s/||/&&/
> >
> > v3: Change non-PCH condition to a gen <= 4 test rather than listing
> > VLV/CHV/BXT as specific platforms to exclude; should be more
> > future-proof as we add new platforms. (Daniel)
> >
> > Cc: Vandana Kannan <[email protected]>
> > Cc: Jani Nikula <[email protected]>
> > Cc: Daniel Vetter <[email protected]>
> > Cc: [email protected]
> > Signed-off-by: Matt Roper <[email protected]>
> > ---
> > Although it's the direction we want to move, I'm not brave enough
> > to blow away
> > the entire PP save/restore for all platforms since I don't have the
> > HW
> > necessary to deal with the regressions that might pop up. The
> > consensus on IRC
> > is that there probably will be a few regressions when we do that,
> > so I'd rather
> > have people with appropriate platform access make those changes.
>
> This is the first step we want to take anyway.
>
> Reviewed-by: Jani Nikula <[email protected]>
Thanks for the patch and review, I pushed the patch to dinq.
--Imre
>
>
>
> >
> > drivers/gpu/drm/i915/i915_suspend.c | 4 ++--
> > 1 file changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/i915/i915_suspend.c
> > b/drivers/gpu/drm/i915/i915_suspend.c
> > index a2aa09c..a8af594 100644
> > --- a/drivers/gpu/drm/i915/i915_suspend.c
> > +++ b/drivers/gpu/drm/i915/i915_suspend.c
> > @@ -49,7 +49,7 @@ static void i915_save_display(struct drm_device
> > *dev)
> > dev_priv->regfile.savePP_ON_DELAYS =
> > I915_READ(PCH_PP_ON_DELAYS);
> > dev_priv->regfile.savePP_OFF_DELAYS =
> > I915_READ(PCH_PP_OFF_DELAYS);
> > dev_priv->regfile.savePP_DIVISOR =
> > I915_READ(PCH_PP_DIVISOR);
> > - } else if (!IS_VALLEYVIEW(dev) && !IS_CHERRYVIEW(dev)) {
> > + } else if (INTEL_INFO(dev)->gen <= 4) {
> > dev_priv->regfile.savePP_CONTROL =
> > I915_READ(PP_CONTROL);
> > dev_priv->regfile.savePP_ON_DELAYS =
> > I915_READ(PP_ON_DELAYS);
> > dev_priv->regfile.savePP_OFF_DELAYS =
> > I915_READ(PP_OFF_DELAYS);
> > @@ -84,7 +84,7 @@ static void i915_restore_display(struct
> > drm_device *dev)
> > I915_WRITE(PCH_PP_OFF_DELAYS, dev_priv-
> > >regfile.savePP_OFF_DELAYS);
> > I915_WRITE(PCH_PP_DIVISOR, dev_priv-
> > >regfile.savePP_DIVISOR);
> > I915_WRITE(PCH_PP_CONTROL, dev_priv-
> > >regfile.savePP_CONTROL);
> > - } else if (!IS_VALLEYVIEW(dev) && !IS_CHERRYVIEW(dev)) {
> > + } else if (INTEL_INFO(dev)->gen <= 4) {
> > I915_WRITE(PP_ON_DELAYS, dev_priv-
> > >regfile.savePP_ON_DELAYS);
> > I915_WRITE(PP_OFF_DELAYS, dev_priv-
> > >regfile.savePP_OFF_DELAYS);
> > I915_WRITE(PP_DIVISOR, dev_priv-
> > >regfile.savePP_DIVISOR);
>
_______________________________________________
Intel-gfx mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/intel-gfx
