On Mon, Apr 25, 2016 at 03:38:07PM +0300, Imre Deak wrote:
> While browsing BSpec I bumped into a note saying we need to tune these
> values based on actual measurements done after initial enabling. I've
> checked that it indeed improves things on BXT. I haven't checked this on
> CHV, but here it is if someone wants to give it a go.
>
> CC: Ville Syrjälä <ville.syrj...@linux.intel.com>
> Signed-off-by: Imre Deak <imre.d...@intel.com>
> ---
> drivers/gpu/drm/i915/intel_pm.c | 41
> +++++++++++++++++++++++++++++------------
> 1 file changed, 29 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c
> index a9b7626..fcfdb7f 100644
> --- a/drivers/gpu/drm/i915/intel_pm.c
> +++ b/drivers/gpu/drm/i915/intel_pm.c
> @@ -6669,11 +6669,32 @@ static void lpt_suspend_hw(struct drm_device *dev)
> }
> }
>
> +static void gen8_set_l3sqc_credits(struct drm_i915_private *dev_priv,
> + int general_prio_credits,
> + int high_prio_credits)
> +{
> + u32 misccpctl;
> +
> + misccpctl = I915_READ(GEN7_MISCCPCTL);
> + I915_WRITE(GEN7_MISCCPCTL, misccpctl & ~GEN7_DOP_CLOCK_GATE_ENABLE);
> +
> + I915_WRITE(GEN8_L3SQCREG1,
> + L3_GENERAL_PRIO_CREDITS(general_prio_credits) |
> + L3_HIGH_PRIO_CREDITS(high_prio_credits));
> +
> + /*
> + * Wait at least 100 clocks before re-enabling clock gating.
> + * See the definition of L3SQCREG1 in BSpec.
> + */
> + POSTING_READ(GEN8_L3SQCREG1);
> + udelay(1);
> + I915_WRITE(GEN7_MISCCPCTL, misccpctl);
> +}
> +
> static void broadwell_init_clock_gating(struct drm_device *dev)
> {
> struct drm_i915_private *dev_priv = dev->dev_private;
> enum pipe pipe;
> - uint32_t misccpctl;
>
> ilk_init_lp_watermarks(dev);
>
> @@ -6708,17 +6729,7 @@ static void broadwell_init_clock_gating(struct
> drm_device *dev)
> * WaProgramL3SqcReg1Default:bdw
> * WaTempDisableDOPClkGating:bdw
The w/a note should be moved as well then.
> */
> - misccpctl = I915_READ(GEN7_MISCCPCTL);
> - I915_WRITE(GEN7_MISCCPCTL, misccpctl & ~GEN7_DOP_CLOCK_GATE_ENABLE);
> - I915_WRITE(GEN8_L3SQCREG1, L3_GENERAL_PRIO_CREDITS(30) |
> - L3_HIGH_PRIO_CREDITS(2));
> - /*
> - * Wait at least 100 clocks before re-enabling clock gating. See
> - * the definition of L3SQCREG1 in BSpec.
> - */
> - POSTING_READ(GEN8_L3SQCREG1);
> - udelay(1);
> - I915_WRITE(GEN7_MISCCPCTL, misccpctl);
> + gen8_set_l3sqc_credits(dev_priv, 30, 2);
>
> /*
> * WaGttCachingOffByDefault:bdw
> @@ -6989,6 +7000,12 @@ static void cherryview_init_clock_gating(struct
> drm_device *dev)
> GEN8_SDEUNIT_CLOCK_GATE_DISABLE);
>
> /*
> + * Adjust credits based on actual latencies, see BSpec LSQC Setting
> + * Recommendations.
> + */
> + gen8_set_l3sqc_credits(dev_priv, 38, 2);
Where exactly in Bspec is this? Last I looked CHV was supposed to be
fine with the defaults.
> +
> + /*
> * GTT cache may not work with big pages, so if those
> * are ever enabled GTT cache may need to be disabled.
> */
> --
> 2.5.0
--
Ville Syrjälä
Intel OTC
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
