On 26/07/2016 22:51, Chris Wilson wrote:
On Tue, Jul 26, 2016 at 05:40:53PM +0100, Arun Siluvery wrote:
This change implements support for per-engine reset as an initial, less
intrusive hang recovery option to be attempted before falling back to the
legacy full GPU reset recovery mode if necessary. This is only supported
from Gen8 onwards.
Hangchecker determines which engines are hung and invokes error handler to
recover from it. Error handler schedules recovery for each of those engines
that are hung. The recovery procedure is as follows,
- force engine to idle: this is done by issuing a reset request
- identifies the request that caused the hang and it is dropped
- reset and re-init engine
- restart submissions to the engine
If engine reset fails then we fall back to heavy weight full gpu reset
which resets all engines and reinitiazes complete state of HW and SW.
Possible reasons for failure,
- engine not ready for reset
- if the HW and SW doesn't agree on the context that caused the hang
- reset itself failed for some reason
Cc: Chris Wilson <ch...@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuopp...@linux.intel.com>
Signed-off-by: Tomas Elf <tomas....@intel.com>
Signed-off-by: Arun Siluvery <arun.siluv...@linux.intel.com>
---
drivers/gpu/drm/i915/i915_drv.c | 55 +++++++++++++++++++++++++++++++++----
drivers/gpu/drm/i915/i915_drv.h | 3 ++
drivers/gpu/drm/i915/i915_gem.c | 2 +-
drivers/gpu/drm/i915/intel_lrc.h | 4 +++
drivers/gpu/drm/i915/intel_uncore.c | 33 ++++++++++++++++++++++
5 files changed, 90 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 5c20e5d..8151aa9 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -1824,17 +1824,60 @@ error:
* Returns zero on successful reset or otherwise an error code.
*
* Procedure is fairly simple:
- * - force engine to idle
- * - save current state which includes head and current request
- * - reset engine
- * - restore saved state and resubmit context
+ * - force engine to idle: this is done by issuing a reset request
+ * - identifies the request that caused the hang and it is retired
+ * - reset engine
+ * - restart submissions to the engine
*/
int i915_reset_engine(struct intel_engine_cs *engine)
{
+ struct drm_i915_private *dev_priv = engine->i915;
int ret;
- /* FIXME: replace me with engine reset sequence */
- ret = -ENODEV;
+ /* Ensure irq handler finishes or is cancelled. */
+ tasklet_kill(&engine->irq_tasklet);
+
+ i915_gem_reset_engine_status(engine);
Not yet safe to be used lockless.
engine is hung and intel_lrc_irq_handler() also won't be running at this
point and we should've received all seqno updates, is it still not safe?
do I really need struct_mutex for this? only caller is i915_gem_reset()
and it takes it.
+ /*Take wake lock to prevent power saving mode */
Why else would you be taking it? We know the wakelock prevents the GT
power well disappearing, the question is why is that important now
across the entirety of this sequence? That's what you explain in
comments.
yes, not useful. It is carried over from initial patch but I agree I
should've updated this.
+ intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
+
+ ret = intel_request_for_reset(engine);
+ if (ret) {
+ DRM_ERROR("Failed to disable %s\n", engine->name);
+ goto out;
+ }
+
+ ret = intel_execlists_reset_prepare(engine);
+ if (ret)
+ goto enable_engine;
+
+ ret = intel_gpu_reset(dev_priv, intel_engine_flag(engine));
+ if (ret) {
+ DRM_ERROR("Failed to reset %s, ret=%d\n", engine->name, ret);
+ goto enable_engine;
+ }
+
+ ret = engine->init_hw(engine);
+ if (ret)
+ goto out;
+
+ /* Restart submissions to the engine after reset */
+ intel_execlists_restart_submission(engine);
Clumsy. See above as we already have an entry point that can initiate
the hw.
I think this is a separate step from init_hw().
In init_hw() we initialize hw state and keep it ready then we feed
submissions.
+enable_engine:
+ /*
+ * we only need to enable engine if we cannot prepare engine for
+ * reset or reset fails. If the reset is successful, engine gets
+ * enabled automatically so we can skip this step.
+ */
+ if (ret)
Then why is the normal path coming through here?
+ intel_clear_reset_request(engine);
+
there is no harm in doing this even when reset is successful, hence
included in the normal path. I will remove ret check to avoid confusion.
+out:
+ /* Wake up anything waiting on this engine's queue */
+ intel_engine_wakeup(engine);
? Random call with incorrect locking. What do you think you are
achieving here because it's not what the comment implies.
sorry, I will come back on this one, I need to better understand few
more things.
+ intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
return ret;
}
+/*
+ * On gen8+ a reset request has to be issued via the reset control register
+ * before a GPU engine can be reset in order to stop the command streamer
+ * and idle the engine. This replaces the legacy way of stopping an engine
+ * by writing to the stop ring bit in the MI_MODE register.
+ */
+int intel_request_for_reset(struct intel_engine_cs *engine)
intel_engine_reset_begin()
It would be preferrable if we can avoid using request here as we are
talking about reseting the hung request elsewhere in this chain.
the term request is overloaded but here infact we are actually
requesting the hw to prepare for reset and wait for it to acknowledge.
intel_engine_reset_begin() sounds fine.
+{
+ if (!intel_has_engine_reset(engine->i915)) {
+ DRM_ERROR("Engine Reset not supported on Gen%d\n",
+ INTEL_INFO(engine->i915)->gen);
ERROR?
This msg is probably unnecessary as we go for engine reset only when it
is available.
+ return -EINVAL;
return -ENODEV;
ok.
+ }
+
+ return gen8_request_engine_reset(engine);
+}
gen8_engine_reset_begin()
+/*
+ * It is possible to back off from a previously issued reset request by simply
+ * clearing the reset request bit in the reset control register.
+ */
+int intel_clear_reset_request(struct intel_engine_cs *engine)
intel_engine_reset_cancel()
+{
+{
+ if (!intel_has_engine_reset(engine->i915)) {
+ DRM_ERROR("Request to clear reset not supported on Gen%d\n",
+ INTEL_INFO(engine->i915)->gen);
+ return -EINVAL;
+ }
+
+ gen8_unrequest_engine_reset(engine);
gen8_engine_reset_cancel()
(only suggestions for avoiding having confusion over requests)
ok, thanks for the renaming suggestions.
regards
Arun
_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
