The eDP backlight and panel enable/disable delays are quite useful to know when measuring time consumed by suspend/resume, and while the information is printed to the kernel log as debug messages, having this information in debugfs makes things easier.
Signed-off-by: David Weinehall <[email protected]> --- drivers/gpu/drm/i915/i915_debugfs.c | 42 +++++++++++++++++++++++++++++++++++-- 1 file changed, 40 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index 7d7b4d9280e9..d89359a50742 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -5474,6 +5474,40 @@ static const struct file_operations i915_dpcd_fops = { .release = single_release, }; +static int i915_panel_show(struct seq_file *m, void *data) +{ + struct drm_connector *connector = m->private; + struct intel_dp *intel_dp = + enc_to_intel_dp(&intel_attached_encoder(connector)->base); + + if (connector->status != connector_status_connected) + return -ENODEV; + + seq_printf(m, "Panel power up delay: %d\n", + intel_dp->panel_power_up_delay); + seq_printf(m, "Panel power down delay: %d\n", + intel_dp->panel_power_down_delay); + seq_printf(m, "Backlight on delay: %d\n", + intel_dp->backlight_on_delay); + seq_printf(m, "Backlight off delay: %d\n", + intel_dp->backlight_off_delay); + + return 0; +} + +static int i915_panel_open(struct inode *inode, struct file *file) +{ + return single_open(file, i915_panel_show, inode->i_private); +} + +static const struct file_operations i915_panel_fops = { + .owner = THIS_MODULE, + .open = i915_panel_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + /** * i915_debugfs_connector_add - add i915 specific connector debugfs files * @connector: pointer to a registered drm_connector @@ -5493,8 +5527,12 @@ int i915_debugfs_connector_add(struct drm_connector *connector) if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort || connector->connector_type == DRM_MODE_CONNECTOR_eDP) - debugfs_create_file("i915_dpcd", S_IRUGO, root, connector, - &i915_dpcd_fops); + debugfs_create_file("i915_dpcd", S_IRUGO, root, + connector, &i915_dpcd_fops); + + if (connector->connector_type == DRM_MODE_CONNECTOR_eDP) + debugfs_create_file("i915_panel_timings", S_IRUGO, root, + connector, &i915_panel_fops); return 0; } -- 2.9.3 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
