Do not allow to set phase adjust value for a pin if PF reset is in
progress, this would cause confusing netlink extack errors as the firmware
cannot process the request properly during the reset time.
Return (-EBUSY) and report extack error for the user who tries configure
pin phase adjust during the reset time.
Test by looping execution of below steps until netlink error appears:
- perform PF reset
$ echo 1 > /sys/class/net/<ice PF>/device/reset
- change pin phase adjust value:
$ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/dpll.yaml \
--do pin-set --json '{"id":0, "phase-adjust":1000}'
Fixes: 90e1c90750d7 ("ice: dpll: implement phase related callbacks")
Reviewed-by: Igor Bagnucki <[email protected]>
Signed-off-by: Arkadiusz Kubalewski <[email protected]>
---
drivers/net/ethernet/intel/ice/ice_dpll.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/intel/ice/ice_dpll.c
b/drivers/net/ethernet/intel/ice/ice_dpll.c
index c102535d23db..54d13c0e4151 100644
--- a/drivers/net/ethernet/intel/ice/ice_dpll.c
+++ b/drivers/net/ethernet/intel/ice/ice_dpll.c
@@ -963,6 +963,9 @@ ice_dpll_pin_phase_adjust_set(const struct dpll_pin *pin,
void *pin_priv,
u8 flag, flags_en = 0;
int ret;
+ if (ice_dpll_is_reset(pf, extack))
+ return -EBUSY;
+
mutex_lock(&pf->dplls.lock);
switch (type) {
case ICE_DPLL_PIN_TYPE_INPUT:
--
2.38.1
