So no actual changes in the driver performance. I prefer a more complete inf with full support for all chipsets as it will work for more people. Debugging I can understand, but smaller inf might make several driver versions needed.
On Jul 18, 6:12 pm, Espionage724 <[email protected]> wrote: > Well I think with a smaller/cleaner inf, it would make the driver > installation faster and it would be easier to debug because of the > cleaner code. > > > > On Sun, Jul 18, 2010 at 12:44 PM, tribaljet <[email protected]> wrote: > > So the logic is having a smaller/cleaner inf will make the driver much > > faster? Because I do have a 945GME > > > On Jul 18, 5:40 pm, Espionage724 <[email protected]> wrote: > >> Those are to enable the MSI PCI intrurputs for several generations of > >> devices. For the 9xx, you only need [igfx_Cal_HardwareDeviceSettings] > >> unless you have the GME. > > >> On Sun, Jul 18, 2010 at 10:51 AM, Kiki <[email protected]> wrote: > >> > I found something on the INF > > >> > the first one is > >> > I understand that some "paths" of the original code have been modified > >> > to accomplish the new ones > >> > but on this section (and also its other "friends" in > >> > GeneralConfigData) > > >> > [i945G0.GeneralConfigData] > >> > [i945G1.GeneralConfigData] > >> > and the rest that similar to above > > >> > have not been changed to the i9xxG0/i9xxG1 style > > >> > I don't know whether they're very important or not, but because I see > >> > the original put them, and I like clean INF, so I change those > >> > sections to suit the modded one, and delete the rest of them that > >> > seems unused (for myself) > > >> > ======================================================================================================================================== > > >> > the second is > > >> > [igfx_Bwg_HardwareDeviceSettings] > >> > [igfx_Cal_HardwareDeviceSettings] > >> > [igfx_Cal_GMEHardwareDeviceSettings] > > >> > I don't know whether the 3 sections above are necessary or not, but > >> > from what I see, the modded one is just using the first section, that > >> > is > > >> > [igfx_Bwg_HardwareDeviceSettings] > > >> > so I delete the other 2 sections, once again because I like it clean > >> > as possible (for myself) > > >> > anyway, please let me know if I actually ruined the codes instead of > >> > making it better >,< I know I still have so much to learn > > >> > -- > >> > 9xx SOLDIERS SANS FRONTIERS > > >> -- > >> Acer TravelMate 2480 > >> GFX: GMA950 CPU: Intel Celeron M 420 @ 1.6Ghz RAM: 2GB DDR2 333Mhz > >> HDD: Samsung 120GB 5400RPM SATA > > > -- > > 9xx SOLDIERS SANS FRONTIERS > > -- > Acer TravelMate 2480 > GFX: GMA950 CPU: Intel Celeron M 420 @ 1.6Ghz RAM: 2GB DDR2 333Mhz > HDD: Samsung 120GB 5400RPM SATA -- 9xx SOLDIERS SANS FRONTIERS
