so, should i use 1.2 cherry or 1.1E? or wait until 1.3 cherry? On 12 abr, 09:27, AngelicTears <[email protected]> wrote: > @marcs > with the device id u given, u have the most common device used in all 945 > family, which is 27A2.. > so u will not have any compatibility error with any future driver release... > > > > > > > > On Tue, Apr 12, 2011 at 2:57 PM, tribaljet <[email protected]> wrote: > > Well, if 1.2 worked, then there's no reason why future drivers won't > > work. And yes, both V1.1 and V1.1E will work. > > > On 12 Abr, 07:37, marcs <[email protected]> wrote: > > > and 1,3 havent been released rigth? > > > any release date? > > > > it will work for me? (1.2 worked) > > > > hardware ID: > > > PCI\VEN_8086&DEV_27A2&SUBSYS_02011028&REV_03 > > > > On 12 abr, 02:05, AngelicTears <[email protected]> wrote: > > > > > for the record, V1.1 is also made by me with a little modification by > > my > > > > friend tribaljet :) > > > > also there are no final version of the V1.2 Sherry, all of the > > development > > > > are converted to the V1.3 sherry.. > > > > > On Tue, Apr 12, 2011 at 5:54 AM, marcs <[email protected]> wrote: > > > > > cant find the device ID, maybe is this? > > > > > Integrado: Intel 82945GMS/GU Graphics Controller 0 [A-3] > > > > > > have installed the recommend V1.1E seem older than the angelic tears > > > > > one, but im getting the same fps > > > > > maybe i should try the angelic tears final version, but i cant find > > it > > > > > in any place > > > > > > On 11 abr, 18:53, tribaljet <[email protected]> wrote: > > > > > > I always recommend V1.1E for netbook users, and even for regular > > > > > > users, since I have a regular laptop with an embedded chipset that > > has > > > > > > a different Device ID. > > > > > > > I can't recall exactly your Device ID, so you have to go to device > > > > > > manager and check on the graphics adapter properties, then post it > > > > > > here. > > > > > > > On 11 Abr, 16:28, marcs <[email protected]> wrote: > > > > > > > > cant find the final version, there inst inhttp:// > > > > > groups.google.com/group/intel9x-gaming/web/drivers-for-9xx > > > > > > > i remember i downloaded the rev2 in a blog, but cant remember > > what > > > > > > > blog > > > > > > > > @tribaljet you mean the service tag? > > > > > > > you think i should install the > > > > > > > Windows 7 - V1.1E for 945 Chipsets (Netbook Compatible) ? or the > > > > > > > cherry one? > > > > > > > > On 11 abr, 00:04, "THEfog ." <[email protected]> wrote: > > > > > > > > > You are using the Rev2 version of the driver, you should > > upgrade to > > > > > the V1.2 > > > > > > > > final for the best performance and stability, also make sure > > you > > > > > clean > > > > > > > > install that driver as some of the stock drivers old files may > > be > > > > > > > > interfering with the operation of the newer MD. > > > > > > > > > THEfog > > > > > > > > > On 11/04/2011 6:43 AM, "arcane cossack" <[email protected]> > > wrote: > > > > > > > > > I'm not sure it actually matters which driver if you're getting > > a > > > > > > > > bluescreen in safe mode. Did the problem happen when you were > > using > > > > > > > > Stock intel drivers? > > > > > > > > > On Apr 10, 5:15 am, marcs <[email protected]> wrote: > > > > > > > > > > hello, i have gma945 (dell latitude d430) an... > > > > > > -- > > > > > 9xx SOLDIERS SANS FRONTIERS > > > -- > > 9xx SOLDIERS SANS FRONTIERS
-- 9xx SOLDIERS SANS FRONTIERS
