Assuming you have a standard version of 945GMS, with one of the typical device IDs, you should be able to use V1.2 Sherry, that will squeeze more performance than V1.1E. Only if you have issues during install, should you fall back to V1.1E.
On 12 Abr, 11:28, marcs <[email protected]> wrote: > so, should i use 1.2 cherry or 1.1E? > or wait until 1.3 cherry? > > On 12 abr, 09:27, AngelicTears <[email protected]> wrote: > > > > > > > > > @marcs > > with the device id u given, u have the most common device used in all 945 > > family, which is 27A2.. > > so u will not have any compatibility error with any future driver release... > > > On Tue, Apr 12, 2011 at 2:57 PM, tribaljet <[email protected]> wrote: > > > Well, if 1.2 worked, then there's no reason why future drivers won't > > > work. And yes, both V1.1 and V1.1E will work. > > > > On 12 Abr, 07:37, marcs <[email protected]> wrote: > > > > and 1,3 havent been released rigth? > > > > any release date? > > > > > it will work for me? (1.2 worked) > > > > > hardware ID: > > > > PCI\VEN_8086&DEV_27A2&SUBSYS_02011028&REV_03 > > > > > On 12 abr, 02:05, AngelicTears <[email protected]> wrote: > > > > > > for the record, V1.1 is also made by me with a little modification by > > > my > > > > > friend tribaljet :) > > > > > also there are no final version of the V1.2 Sherry, all of the > > > development > > > > > are converted to the V1.3 sherry.. > > > > > > On Tue, Apr 12, 2011 at 5:54 AM, marcs <[email protected]> wrote: > > > > > > cant find the device ID, maybe is this? > > > > > > Integrado: Intel 82945GMS/GU Graphics Controller 0 [A-3] > > > > > > > have installed the recommend V1.1E seem older than the angelic tears > > > > > > one, but im getting the same fps > > > > > > maybe i should try the angelic tears final version, but i cant find > > > it > > > > > > in any place > > > > > > > On 11 abr, 18:53, tribaljet <[email protected]> wrote: > > > > > > > I always recommend V1.1E for netbook users, and even for regular > > > > > > > users, since I have a regular laptop with an embedded chipset that > > > has > > > > > > > a different Device ID. > > > > > > > > I can't recall exactly your Device ID, so you have to go to device > > > > > > > manager and check on the graphics adapter properties, then post it > > > > > > > here. > > > > > > > > On 11 Abr, 16:28, marcs <[email protected]> wrote: > > > > > > > > > cant find the final version, there inst inhttp:// > > > > > > groups.google.com/group/intel9x-gaming/web/drivers-for-9xx > > > > > > > > i remember i downloaded the rev2 in a blog, but cant remember > > > what > > > > > > > > blog > > > > > > > > > @tribaljet you mean the service tag? > > > > > > > > you think i should install the > > > > > > > > Windows 7 - V1.1E for 945 Chipsets (Netbook Compatible) ? or the > > > > > > > > cherry one? > > > > > > > > > On 11 abr, 00:04, "THEfog ." <[email protected]> wrote: > > > > > > > > > > You are using the Rev2 version of the driver, you should > > > upgrade to > > > > > > the V1.2 > > > > > > > > > final for the best performance and stability, also make sure > > > you > > > > > > clean > > > > > > > > > install that driver as some of the stock drivers old files may > > > be > > > > > > > > > interfering with the operation of the newer MD. > > > > > > > > > > THEfog > > > > > > > > > > On 11/04/2011 6:43 AM, "arcane cossack" <[email protected]> > > > wrote: > > > > > > > > > > I'm not sure it actually matters which driver if you're > > > > > > > > > getting > > > a > > > > > > > > > bluescreen in safe mode. Did the problem happen when you were > > > using > > > > > > > > > Stock intel drivers? > > > > > > > > > > On Apr 10, 5:15 am, marcs <[email protected]> wrote: > > > > > > > > > > > hello, i have gma945 (dell latitude d430) an... > > > > > > > -- > > > > > > 9xx SOLDIERS SANS FRONTIERS > > > > -- > > > 9xx SOLDIERS SANS FRONTIERS -- 9xx SOLDIERS SANS FRONTIERS
