I hate to ask, but: did you turn on the Remote Server feature? On the Mac, it's Edi t> Server Settings. Click the Start button underneath the "Remote Server Listening on Port 8181" heading.
I had the same problem when I started trying to use map status probes. Hope this helps, Doug -- Doug Weathers, Network Administrator St. Charles Medical Center >>> [EMAIL PROTECTED] 11/03/2004 3:02:42 PM >>> Hello- I've got Map Status devices that point to open maps on the same InterMapper host. The problem I'm having is that InterMapper colors them orange (ALARM), and the "Result:" field says 'No such map: "<Map Name>" ' Also, the Map Status is incorrect, only showing orange even if there are WARNING or DOWN items on the map. Each Map Status probe uses the IP address "127.0.0.1" and a name and password that is associated with that IP address. The ironic thing is that when I double-click on the Map Status device, the correct Map window pops up! Thanks, Mark P. - Mark C. Persiko, Network Engineer - IT Division, Boulder Valley School District ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED] IMPORTANT NOTICE: This communication, including any attachment, contains information that may be confidential or privileged, and is intended solely for the entity or individual to whom it is addressed. If you are not the intended recipient, you should delete this message and are hereby notified that any disclosure, copying, or distribution of this message is strictly prohibited. Nothing in this email, including any attachment, is intended to be a legally binding signature. ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED]
