Re: [IM-Talk] FW: Map Status Probe Not Showing Correct Map Status

[William W. Fisher]

Please check that the user name and password you are using in the Map 
Status probe is allowed to access the map in question, based on the 
settings for the "Remote Server". Normally, 127.0.0.1 is treated as an 
auto-login for Administrator, but it is possible to disable that 
setting. When you login as a non-admin user, you are only allowed to 
see the maps that have permitted Remote access -- the others will not 
even appear to exist.

Regards,
Bill Fisher
Dartware, LLC
On Nov 3, 2004, at 6:02 PM, Mark Persiko wrote:
Hello-
I've got Map Status devices that point to open maps on the same
InterMapper host.  The problem I'm having is that InterMapper colors
them orange (ALARM), and the "Result:" field says 'No such map:  "<Map
Name>" '  Also, the Map Status is incorrect, only showing orange even 
if
there are WARNING or DOWN items on the map.

Each Map Status probe uses the IP address "127.0.0.1" and a name and
password that is associated with that IP address.
The ironic thing is that when I double-click on the Map Status device,
the correct Map window pops up!
Thanks,
 Mark P.
- Mark C. Persiko, Network Engineer
- IT Division, Boulder Valley School District

____________________________________________________________________
List archives: 
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [EMAIL PROTECTED]