On Nov 18, 2004, at 12:34 PM, Mark Persiko wrote:
Another question about the XSERVE G5 probe: what are the thresholds for
this probe? I can't find a reference to it in the manual or in the
Probes folder.
The probe uses the same thresholds that are used by the Server Monitor app. The protocol actually specifies when a value has surpassed a threshold, and the probe will just reflect this in its state. For network interfaces, disk drives and enclosure intrusion state, the protocol includes a summary that is an integer. The integer is added to the total ERROR_LEVEL of the probe. For temperatures, power supplies, and blower speeds, it actually specifies min and max warning and failure thresholds that are used to generate the Reason text in the Status Window. These also include an integer summary of the state that is added to the ERROR_LEVEL. This ERROR_LEVEL determines the state of the device in InterMapper:
0 == OK
1 == warning
2 == alarm
3+ == down
-Tex Clayton Dartware, LLC http://www.dartware.com
____________________________________________________________________
List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [EMAIL PROTECTED]
