Hi,
It looks to me like the Input voltage is actually displaying the
Output voltage!
1: The numbers are Always the same
2: Even when the UPS is on Smart Boost
3: When I drag the Input number to a Chart, is labels it 'Output
Voltage (Volts)'.
Device Status
<snip>
Status: UP
Probe: APC UPS (port 161 SNMPv2c)
Up Time: 2 days, 0 hours, 28 minutes
SysName: CPHADM01
Availability: 100 % (of 1 hour, 51 minutes, 31 seconds)
Packet Loss: 0.0 % (of 468 total attempts) [Reset]
Recent Loss: None
Round-trip time: 46 msec
APC UPS (Single Phase) Information
Model: SMART-UPS 3000 RM
Firmware: 92.14.I
Status: On Smart Boost
Battery: 100 % Charge, 38 minutes left.
Internal temperature is 38 °C / 100 °F.
Last replaced on 4/15/02 and still functioning.
Output: 29 % Load; 237 Volts; 50 Hz; 0.0 Amps.
Input: 237 Volts (208-211V over last minute); 50 Hz.
Last input failure was a Black Out.
Bugs or Requests? Please contact us.
Recent Outages:
04/06 09:38:10: DOWN for 8 minutes, 21 seconds
04/05 15:41:54: DOWN for 24 seconds
Last updated Apr 06, 11:49:41; interval: 30 seconds
Reason: Abnormal Input, Status = On Smart Boost
Jakob Peterhänsel
"Tell me why, don't we try, not to break our hearts
and make it so hard for our selfs"
P.S.B. 1987
Email: [EMAIL PROTECTED]
AIM: Marook
Phone: +45 22684961
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [EMAIL PROTECTED]
