I probably didn't explain myself very clear. I would like to monitor
one of the PVC's if possible with Intermapper. Below is a copy of the
show interface command. I probably need to get with Cisco first and
see if this is possible through SNMP. I want to track the throughput
on different PVC's.
!
interface Loopback1
ip address 206.199.178.1 255.255.254.0
!
!
interface ATM1/0.254 point-to-point
description Customer Name
ip unnumbered Loopback1
atm route-bridged ip
pvc 12/53
encapsulation aal5snap
!
LN_ATM_Router#show int atm1/0.254
ATM1/0.254 is up, line protocol is up
Hardware is RS8234 ATM DS3
Description: Customer Name
Interface is unnumbered. Using address of Loopback1 (206.199.178.1)
MTU 4470 bytes, BW 45000 Kbit, DLY 190 usec,
reliability 255/255, txload 36/255, rxload 43/255
Encapsulation ATM
104662370 packets input, 18084167124 bytes
102772590 packets output, 59991323049 bytes
0 OAM cells input, 0 OAM cells output
AAL5 CRC errors : 232
AAL5 SAR Timeouts : 0
AAL5 Oversized SDUs : 0
AAL5 length violation : 223
AAL5 CPI Error : 0
ARP type: ARPA, ARP Timeout 04:00:00
Thanks
Bennie
On Dec 2, 2006, at 4:26 PM, Jakob Peterhänsel wrote:
Yes - I do.
You have a few hundred what? Interfaces, bytes, bites?
Here is what I see from a C828 G.SHDSL router
AT0 ATM0 adsl 2312000 Down 1
AT0-shdsl ATM0-shdsl shdsl 2312000 Down 8
ATM0-aal5 layer ATM0-aal5 layer aal5 0 Down 6
ATM0-atm layer ATM0-atm layer atm 0 Down 4
ATM0.0-aal5 layer ATM0.0-aal5 layer aal5 2312000
Active 7
ATM0.0-atm subif ATM0.0-atm subif atmSubInterface
2312000 Down 5
Di0 Dialer0 ppp 56000 Active 9
Et0 Ethernet0 ethernetCsmacd 10000000 Active
2
Nu0 Null0 other 10000000000 Active 3
Vi1 Virtual-Access1 ppp 100000000 Active 10
Vi2 Virtual-Access2 ppp 56000 Active 11
The interfaces with traffic here, is Et0 and ATM0.0-aal5
Does that help?
Jakob Peterhänsel
"Be a part of the Love Generation - carry a smile, not a gun."
- JP, May 2006
Email: [EMAIL PROTECTED]
AIM: Marook
Phone: +45 22684961
On 02/12/2006, at 5.19, Bennie Warren wrote:
Is anyone out there monitoring dsl throughput on a Cisco Router? I
have a few hundred on the router and they are all unnumbered
interfaces so not sure if there is an easy way to do this. A
customer is wondering if they are getting close to their BW max yet.
Thanks in Advance.
Bennie
--
**************************************
Bennie Warren
LemooreNet
237 C Street Lemoore, CA 93245
Phone: 559.924.5909 Fax 559.924.9578
[EMAIL PROTECTED]
http://www.lemoorenet.com
**************************************
____________________________________________________________________
List archives:http://www.mail-archive.com/intermapper-talk%
40list.dartware.com/
To unsubscribe: send email to: [EMAIL PROTECTED]
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [EMAIL PROTECTED]
--
**************************************
Bennie Warren
LemooreNet
237 C Street Lemoore, CA 93245
Phone: 559.924.5909 Fax 559.924.9578
[EMAIL PROTECTED]
http://www.lemoorenet.com
**************************************
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [EMAIL PROTECTED]
