Hi CP, You could do this by creating a custom SNMP trap probe. Detailed information on creating custom SNMP trap probes can be found on this page of the online documentation:
http://dartware.com/support/docs/dev/Content/02-CustomProbes/handlingtraps.h tm Regards, Janice Losgar Dartware, LLC -----Original Message----- From: [email protected] [mailto:[EMAIL PROTECTED] On Behalf Of CunningPike Sent: Thursday, December 20, 2007 3:41 PM To: [email protected] Subject: [IM-Talk] Translating specificTrap into a specific message Hi there, We are using traps to monitor a remote HP server and receive the appropriate trap messages when a PSU goes offline etc. What we would like to do though is translate the specificTrap ID into a condition string specific to each ID (e.g. 6049 means that one of the redundant PSUs is not working) - is there a way to go about this? CP ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED] ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED]
