A couple of questions for anyone else with an ATM circuit. Below is some info on my ATM circuit. It is mostly in critical alarm with IM. How high do some of you set the error rate for this? Also on the ifIndex = 10 it looks like the last updated isn't being updated properly. How are these error numbers calculated?

Thanks
Bennie

Version 4.6.5 (Build 7C181)
Built on Tue Dec 18 01:00:38 EST 2007.

Device Status
       Name: LN ATM Router
   DNS Name: (Unknown)
    Address: 209.78.77.1
     Status: UP
      Probe: SNMP - Cisco (v2c) (port 161 SNMPv2c)
    Up Time: 182 days, 7 hours, 26 minutes
    SysName: LN_ATM_Router.lemoorenet.com
  Availability:            100 % (of 5 days, 0 hours, 57 minutes)
  Packet Loss:             0.0 % (of 36131 total attempts)
  Short-term Packet Loss:  0.0 % (of 100 last attempts) [Reset]
  Recent Loss:  None
  Round-trip time:  1 msec
Cisco Device Information
  CPU Percent Busy: 8 % (of last 5 seconds)
  Avg. CPU % Busy:  9 % (1 min.), 9 % (5 min.)
  Available Memory: 403244508 bytes
Last updated Dec 27, 09:58:08; interval: 1 minute, 0 seconds
Reason: ATM1/0.1-atm subif [ifIndex=10] RX Errors = 222/minute

Interface Status  (ifIndex = 10)
  Device Name:  LN ATM Router
  Description:  ATM1/0.1-atm subif
  Type:         20 MBit atmSubInterface (MTU=4470)
  Status:       UP for 181 days, 15 hours
  Other Info:   No Connector
Interface Statistics
  Utilization:  44.7 %  (20 MBit/20 MBit bandwidth)
  Percent Err:  0.23 %  (183103  pkts w/o error)
  Transmit Statistics    (13.6 % utilization)
    Pkt/Second:    1417  ( 0.0 % mcast,  0.0 % bcast)
    Byte/Second: 338798  (2.58M  bps)
    Err/Minute:       0  (0  errors)
    Disc/Minute:      0  (0  discards)
    Percent Err:  0.0 %  (85175  pkts w/o error)
  Receive Statistics     (44.7 % utilization)
    Pkt/Second:    1630  ( 0.0 % mcast,  0.0 % bcast)
    Byte/Second: 1.06 M  (8.52M  bps)
    Err/Minute:     222  (223  errors)
    Disc/Minute:      0  (0  discards)
    Percent Err: 0.23 %  (97928  pkts w/o error)
Last updated Dec 26, 18:02:22; sample: 1 minute, 0 seconds.

Interface Status  (ifIndex = 11)
  Device Name:  LN ATM Router
  Description:  ATM1/0.1-aal5 layer
  Type:         20 MBit aal5 (MTU=4470)
  Status:       UP for 182 days, 7 hours
  Address:      206.171.136.74  (255.255.255.252)
  Other Info:   No Connector
Interface Statistics
  Utilization:  32.8 %  (of 20 MBit  FD bandwidth)
  Percent Err:   0.0 %  (130330  pkts w/o error)
  Transmit Statistics    (8.54 % utilization)
    Pkt/Second:     996  ( 0.0 % multicast)
    Byte/Second: 213490  (1.63M  bps)
    Err/Minute:       0  (0  errors)
    Disc/Minute:      0  (0  discards)
    Percent Err:  0.0 %  (59844  pkts w/o error)
  Receive Statistics     (32.8 % utilization)
    Pkt/Second:    1173  ( 0.0 % multicast)
    Byte/Second: 820177  (6.26M  bps)
    Err/Minute:       0  (0  errors)
    Disc/Minute:      0  (0  discards)
    Percent Err:  0.0 %  (70486  pkts w/o error)
Last updated Dec 27, 10:00:08; sample: 1 minute, 0 seconds.


--
**************************************
Bennie Warren
LemooreNet
237 C Street Lemoore, CA 93245
Phone: 559.924.5909 Fax 559.924.9578
[EMAIL PROTECTED]
http://www.lemoorenet.com
**************************************


____________________________________________________________________
List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [EMAIL PROTECTED]

Reply via email to