I've been asking to fix this 'bug' for a while now. Basically, the logic should be, if a failure is detected, then the devices "up the chain" should be polled one by one to determine where the failure is.
---- Andrey Gordon | Epic Systems Corporation | Network Engineer | CaTS | 608.271.9000 ________________________________ From: "Gibby, Joel" <[EMAIL PROTECTED]> Reply-To: InterMapper Discussion <[email protected]> Date: Wed, 2 Apr 2008 13:01:08 -0500 To: InterMapper Discussion <[email protected]> Subject: RE: [IM-Talk] Mulitple probe request/Vantage point >I could test with another device that I can actually disable but >thought to ask here first. Ok, I did test it and it seems to work. Occasionally, one of the "lower" probes would get polled before the "upper" probe and trigger extraneous notifications. The probes below the upper were greyed out like the should be though. This would not be necessary however if multiple probes could be combined for a device (without using map status probes). --- Joel ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED] ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED]
