Hi Sharon,
You did it exactly right. InterMapper reports the speed and type of
the interface based upon the SNMP response from the device. If you
know the device is incorrectly reporting the speed, you can change the
reported speed of the interface to the actual speed by right-clicking
on the interface entry in the Interfaces window and selecting 'Set
Link Speed' from the context menu. You can also do this by right-
clicking on the link itself and choosing 'Set Link Speed' from the
context menu.
Regards,
Janice Losgar
Dartware, LLC
On Nov 12, 2009, at 2:40 PM, IM-Talk-Forum wrote:
Recently moved some servers and I was trying to check to see if they
were connecting at the proper speed and duplex.
How can I see the speed/duplex that are on the network via using
interMapper.
When I right click on device(server) and select interfaces the
reading is 100M and I know for a fact they have GIGABIT NIC on a GIG
switch
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [email protected]
