On 1/31/2010 7:25 PM, yozh wrote:
Please send the netsaw2.log/ns2flows.log file (location and name vary with the
OS, see the readme for each platform on the download page:)
>
> http://www.intermapper.com/download-intermapper
>
> It would also be helpful to send the 'Copy to Clipboard' output from the Flows
Settings> About window along with the above-referenced log file
[email protected]. It sounds as if you have done a packet capture as well? If
you could send a sample of the packet capture (tcpdump/Wireshark) that would be very
helpful as well.
I have some additional information for you. The Cisco Nexus 1000v is a
a NetFlow exporter built into a VMWare ESX server so that you can see
all the traffic between virtual machines, just as if there were a real
switch.
Consequently, you should be able to configure it as normal. Here is a
guide to configuring Netflow on the Nexus 1000v on Cisco's site:
http://www.cisco.com/en/US/docs/switches/datacenter/nexus1000/sw/4_0/troubleshooting/configuration/guide/trouble_11netflow.html
I would like to open a support ticket for this, but I don't have your
email address. Would you please let me know if this information helps
you? If not, I would be happy to open a support ticket for you. You can
always create a ticket by sending an email to [email protected], or
by using the Help > Report a Bug window in InterMapper.
Thanks!
Regards,
Janice Losgar
Dartware, LLC
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [email protected]
