If Andrey's solution isn't viable in your case you can always set up a
simple SNMP Comparison probe to check ifStatus on the ports you care
about and use either InterMapper's SNMP Trap notifier type or a
command-line notifier to generate an appropriate trap for Splunk.
-MG
On Jun 3, 2010, at 1:02 PM, <[email protected]> wrote:
Is there a reason why you monitor all user ports in IM? I usually
only "display" the uplink ports. Ifdown generates a warning I
believe and sends an notification with the name of the port.
Is that what you are asking?
--------------
Andrey Khomyakov | Senior Network Engineer | +1.617.879.5945
Confidentiality Note: This e-mail, and any attachment to it, is
intended to be confidential and might be legally privileged. It is
intended solely for the use of the addressee. If you are not the
intended recipient, you are hereby notified that reading, copying,
disseminating or distributing this email is strictly prohibited. If
you have received this e-mail in error, please immediately return it
to the sender and delete it from your system. Thank you.
-----Original Message-----
From: [email protected] [mailto:[email protected]
] On Behalf Of Randy Baker
Sent: Thursday, June 03, 2010 12:58 PM
To: InterMapper Discussion
Subject: [IM-Talk] Notifiers per device port
Hi:
Unless I am overlooking something, it seems that you cannot put a
notifier on a switch port.
The application I have for this feature is as follows: We typically
have multiple uplink ports per switch, so monitoring the device is
not completely effective. We are running Splunk to capture all
syslog events, and every time a user turns on or off their computer
we get messages indicating that a port is up or down. It would be
nice to no longer trap for ports up or down on the device as I
cannot discriminate as to what ports I want to watch. Ideally, I
would like Intermapper to detect the loss of only the uplink ports
to a switch and to send a SNMPT trap notification to Splunk to
record the event.
If there is a way to do this, I would appreciate some pointers.
Otherwise, this would be a nice feature in future releases.
Thank you
Randy Baker
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [email protected]
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [email protected]
____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [email protected]
