Hi Ytai, I've tried installing the latest firmware and I'm still having the same issue. I've managed to do a configuration wipe but that didn't make a difference. I've switched to a Windows PC, installed the driver etc. Now, when putting the IOIO in bootloader mode the IOIO enumerates and ioiodude --port=COM<number> versions outputs this:
IOIO Bootloader detected. Hardware version: SPRK0020 Bootloader version: IOIO0400 Platform version: IOIO0030 However, when attempting to flash the latest firmware, like this: ioiodude --port=COM5 --reset write App-IOIO0500.ioioapp I get an IOException and IOIODude exits. Any further ideas? Thomas, I've put this part of the project on hold for the moment whilst I work on other things. I haven't noticed any patterns as yet. In fact, we've gone from getting some data, albeit dirty, to getting no data at all now so it's either something obvious I'm doing wrong, a problem with my IOIO board or something else. I'm switching pins just to see if that makes any difference and I've also written a simple test app to rule out the software side of things. I'll get back to it soon at let you know what I find. David -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/groups/opt_out.
