Hi! Yes it appears to be fixed now! I can not 100% confirm it, as during the time I switched to another board where I started using another board, with other ports - but I don't see the issue anymore! So I am happy.
//Thomas Den söndagen den 2:e februari 2014 kl. 15:07:16 UTC+1 skrev davidmc: > > Hi Thomas, > > With the latest firmware and api, these problems appear to be fixed. Have > you tried it? > > David > > On Thursday, 26 December 2013 23:21:06 UTC, Thomas Hermansson wrote: >> >> Hi Davidmc! >> >> Have you found out anything more about what is causing this problem, or >> when it appears? I have the same problems, but also see some incorrect >> readings that are not 100 times to large, but only 3-4 times to large. I´m >> also operating on frequencies around 0-50Hz (using a windsensor). >> >> ONE of the things that may cause your high incorrect readings is probably >> this bug that I filed a while ago: https://github.com/ytai/ioio/issues/70 >> >> I am working on a way to be able to reproduce this error for Ytai, but it >> seems not to appear on my other device when trying to connect a pwm output >> to a pulscounter to try to reproduce it in a simpler way. But maybe you >> have found out something more? Problem only shows when using several analog >> inputs at the same time? Problem most seen when real input frequence is x >> Hz? Anything would help. >> >> //Thomas >> >> >> Den lördagen den 14:e december 2013 kl. 02:28:27 UTC+1 skrev Ytai: >>> >>> That shouldn't make a difference, and I'm not sure I understand why >>> IOIOBridge is related. Try without the hub, or try a different PC. >>> Otherwise, please tell me in detail the steps that you're taking, maybe >>> there's some step that's wrong. >>> >>> >>> On Fri, Dec 13, 2013 at 5:12 PM, davidmc <[email protected]> wrote: >>> >>>> Hi, >>>> >>>> I tried the configuration wipe, but I'm not sure if it actually did >>>> anything. I still can't update the firmware anyway. Since I use >>>> IOIOBridge, >>>> I've been using a powered usb hub to power the IOIO for the configuration >>>> wipe and putting it into Bootloader mode. Could this be making a >>>> difference? >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "ioio-users" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to [email protected]. >>>> To post to this group, send email to [email protected]. >>>> Visit this group at http://groups.google.com/group/ioio-users. >>>> For more options, visit https://groups.google.com/groups/opt_out. >>>> >>> >>> -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/groups/opt_out.
