I am trying to fix the IOIO-OTG to work with IOIOLibAccessory on the Nexus 5 running 4.4.2. During connect the program gets stuck trying to soft open the accessory. <code> AccessoryConnectionBootstrap.Connection.waitForConnect()#if (localInputStream_.read() == 1) </code> Is blocking and never returning until the device is disconnected.(as warned). I do not know the next steps for debugging lower than this. Any suggestions?
On Monday, December 16, 2013 8:19:52 PM UTC-5, Ytai wrote: > > ADB mode stopped working in Android 4.2 or something around there. You > should use OpenAccessory mode in this case (achieved by turning USB > debugging off on the Android, and building your app against > IOIOLibAccessory). > Having that said, there's a particular issue that's been reported for N5 > (unrelated to KitKat) preventing the IOIO from working with it in either > mode. However, the preliminary support for IOIO in device mode (which only > works with a IOIO-OTG, unfortunately) is the current workaround for this > issue. > Since I don't have a N5, there's not much I can do about this at the > moment. I'm hoping that someone that understands the internals to some > extent will help me out here. > > > On Mon, Dec 16, 2013 at 1:00 PM, martinarcher <[email protected]<javascript:> > > wrote: > >> Hello, >> >> I have an IOIO V1 that I use at work to remotely reboot a large high >> voltage piece of equipment. We have used it for a few years with an >> application I wrote (running on an older Gingerbread HTC phone). We all >> use newer phones (I have a Nexus 5 and we also have 2 Nexus 4's in the >> group). With USB debugging enabled on the Kitkat devices, they simply will >> not acknowledge the IOIO being connected. I have tried by app as well as >> the IOIO Manager->Programming screen. Both simply state they are waiting >> for the IOIO to connect. As soon as I reconnect the same cable to the >> Gingerbread phone it is recognized. Is there an issue with 4.4.2 and the >> IOIO? >> >> Thanks! >> >> -- >> You received this message because you are subscribed to the Google Groups >> "ioio-users" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] <javascript:>. >> To post to this group, send email to [email protected]<javascript:> >> . >> Visit this group at http://groups.google.com/group/ioio-users. >> For more options, visit https://groups.google.com/groups/opt_out. >> > > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/groups/opt_out.
