Dear Ytai, Does Grove Temp&Humi Sensor SEN11301P or AOSONG OHT11 Temp&Humi Sensor works with IOIO-OTG?
On Thursday, February 20, 2014 4:48:22 PM UTC, Ytai wrote: > > Bonjour, English please! > There are two possible ways I would recommend: > > - Using a TMP102 over I2C. This is probably the easiest. This chip has > breakout boards sold by many hobby-electronics manufacturers, such as > SparkFun. > - Using a thermistor with a pull-up resistor and an analog input. This > might come out cheaper, but is slightly more complicated on the software > side (deriving the temperature from the measured voltage requires some > math > - nothing too bad though). Also, thermistors are very non-linear, so you'd > have to limit yourself to a certain, rather small range in order to get > reasonable precision. > > > > On Wed, Feb 19, 2014 at 5:48 PM, يمامة التيسير <[email protected]<javascript:> > > wrote: > >> Bonjour, je veux un tuto sur le sensor temperature pour mesurer la >> température avec la carte IOIO android >> >> -- >> You received this message because you are subscribed to the Google Groups >> "ioio-users" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to [email protected] <javascript:>. >> To post to this group, send email to [email protected]<javascript:> >> . >> Visit this group at http://groups.google.com/group/ioio-users. >> For more options, visit https://groups.google.com/groups/opt_out. >> > > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/groups/opt_out.
