Marius, how is this question different than the one I answered on my
previous post?


On Wed, Feb 26, 2014 at 7:26 AM, Marius Vosylius
<[email protected]>wrote:

> Dear Ytai, Does Grove Temp&Humi Sensor SEN11301P or AOSONG OHT11 Temp&Humi
> Sensor works with IOIO-OTG?
>
>
> On Thursday, February 20, 2014 4:48:22 PM UTC, Ytai wrote:
>
>> Bonjour, English please!
>> There are two possible ways I would recommend:
>>
>>    - Using a TMP102 over I2C. This is probably the easiest. This chip
>>    has breakout boards sold by many hobby-electronics manufacturers, such as
>>    SparkFun.
>>    - Using a thermistor with a pull-up resistor and an analog input.
>>    This might come out cheaper, but is slightly more complicated on the
>>    software side (deriving the temperature from the measured voltage requires
>>    some math - nothing too bad though). Also, thermistors are very 
>> non-linear,
>>    so you'd have to limit yourself to a certain, rather small range in order
>>    to get reasonable precision.
>>
>>
>>
>> On Wed, Feb 19, 2014 at 5:48 PM, يمامة التيسير <[email protected]> wrote:
>>
>>> Bonjour, je veux un tuto sur le sensor temperature pour mesurer la
>>> température avec la carte IOIO android
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "ioio-users" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to [email protected].
>>> To post to this group, send email to [email protected].
>>>
>>> Visit this group at http://groups.google.com/group/ioio-users.
>>> For more options, visit https://groups.google.com/groups/opt_out.
>>>
>>
>>  --
> You received this message because you are subscribed to the Google Groups
> "ioio-users" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To post to this group, send email to [email protected].
> Visit this group at http://groups.google.com/group/ioio-users.
> For more options, visit https://groups.google.com/groups/opt_out.
>

-- 
You received this message because you are subscribed to the Google Groups 
"ioio-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send email to [email protected].
Visit this group at http://groups.google.com/group/ioio-users.
For more options, visit https://groups.google.com/groups/opt_out.

Reply via email to