Let's remove variables here. Fork your code so that it only has minimal support for the 4WD and servo. Do you have a datasheet for this 4WD driver? Can you send an electrical diagram of how those components are connected to the IOIO and power supply?
Regarding resistors, 1/4W or 1/8W through-hole resistors are probably what you're looking for. Any electronics store would have them (e.g. Fry's or RadioShack if you're in the US) and you can buy kits on eBay, Amazon or Digikey or one of the electronics hobby stores (SparkFun, Adafruit, etc.). On Fri, Mar 21, 2014 at 9:28 AM, Marius Vosylius <[email protected]>wrote: > Ytai, can you tell me what type resistors do I need to use for each > bellow. And where Can I buy them. > > My Project has > > 4WD Motor (8 Pins) > > 2 SG92R Servos (2 Pins) > > 1 CMP03 Compass (1 Pin) > > 1 GPS Bee (1 Pin) > > Temperature Sensor > > Humidity Sensor > > Thanks > > > > > On Friday, March 21, 2014 12:05:53 AM UTC, Ytai wrote: > >> Is the servo control signal floating when this happens? If so, I would >> recommend a pull-down (10K-100K) on the control line. >> >> >> On Thu, Mar 20, 2014 at 12:19 PM, Marius Vosylius >> <[email protected]>wrote: >> >>> I have 4 WD Motor and One Servo, both should be working separately, but >>> then I start my 4wd motor My servo starts interact too, is theres any >>> problems with any of them? >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "ioio-users" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To post to this group, send email to [email protected]. >>> >>> Visit this group at http://groups.google.com/group/ioio-users. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- > You received this message because you are subscribed to the Google Groups > "ioio-users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/ioio-users. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
