Hello guys, I'm having a IOIO-OTG with specs of:-
Hardware version : SPRK0020 Bootloader version : IOIO0400 Application version : IOIO0500 As I try to connect my IOIO with my Android (Lenovo S650 or Google Nexus 7 1st Gen) there are no Red LED lighten up. But, if i added power supply to the IOIO, the Red LED will lighten up but doesn't charged my Android or shows any notifications say that it is connected or something. As I try to connect it with bluetooth dongle, the dongle can't be detected with any devices, means there were no power supplied to the dongle, except for one dongle that shows one red dot upon connecting the ioio with dongle through usb cable given. (although the dongle should pop-out more than one blink). I've tried to upgrade my firmware version assuming the bluetooth dongle can be lighten up, but there are no improvement at all. Here are the list of dongle i had been used:- 1) VZTEC Bluetooth USB Adapter - NO SIGNAL SHOW 2) VZTEC Mini USB Bluetooth Dongle - NO SIGNAL SHOW 3) AVF Bluetooth USB Dongle - ONE BLINK THEN NO SIGNAL 4) MINI USB Bluetooth Adapter , cheap one from China - NO SIGNAL SHOW This is how my board looks like:- <https://lh3.googleusercontent.com/-5pXvtCs2WyQ/UzJHOsoeOXI/AAAAAAAAACo/jAvIqfEssaA/s1600/IMG_20140320_102005.jpg> I powered it up through the ribbon cable. -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
