What do you get in logcat after a failed attempt to run the app?
On Apr 16, 2014 3:27 PM, "Mertcan Çomak" <[email protected]> wrote:

> IOIO power led is on and it charges when I connect it to the phone. USB
> debugging mode is off as you said. Yet more, when I connect IOIO to my
> Android phone without having the debugging mode on, it asks if it should
> run the helloioio app as default. No problem until there. But the yellow
> led doesn't turn on. I've already checked everything you mentioned. But I
> couldn't run IOIO-Dude which my friend asked you about it before:
>
> https://groups.google.com/forum/#!searchin/ioio-users/ufuk/ioio-users/3W5eeW_STJk/jjBL_KEfOSwJ
>
> I did what you suggested, but got the same results. In addition, I ran it
> before. If it was about the firmware, it wouldn't have ran before. All this
> happened after I connected XBee as shown in this link:
>
> https://www.flickr.com/photos/robomotic/5751815411/
>
> 17 Nisan 2014 Perşembe 00:19:38 UTC+3 tarihinde Ytai yazdı:
>>
>> First I would check that the IOIO is not damaged in any way. The easiest
>> way is to verify that when the IOIO is connected to the Android the power
>> LED on the IOIO is on and the Android indicates charging.
>> If that's all good, I would use the precompiled HelloIOIO.app. Make sure
>> it matches the firmware version you're running. If you don't know which
>> firmware version you have, use ioiodude versions.
>> Also, I would try to either enable or disable USB debugging on the phone.
>> Newer versions of Android need to have this at "off".
>>
>>
>> On Wed, Apr 16, 2014 at 1:44 PM, Mertcan Çomak <[email protected]>wrote:
>>
>>> Hi, I managed to run helloioio before on IOIO-OTG. I could control the
>>> yellow led via both PC and Android device. After that, I tried using XBee
>>> and couldn't make it work. Now, however, I can't run helloioio app on
>>> Android phone, but I can control the yellow via PC. What do you think is
>>> causing this problem? My Android Device: Samsung Galaxy S3 Thanks.
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "ioio-users" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to [email protected].
>>> To post to this group, send email to [email protected].
>>> Visit this group at http://groups.google.com/group/ioio-users.
>>> For more options, visit https://groups.google.com/d/optout.
>>>
>>
>>  --
> You received this message because you are subscribed to the Google Groups
> "ioio-users" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [email protected].
> To post to this group, send email to [email protected].
> Visit this group at http://groups.google.com/group/ioio-users.
> For more options, visit https://groups.google.com/d/optout.
>

-- 
You received this message because you are subscribed to the Google Groups 
"ioio-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send email to [email protected].
Visit this group at http://groups.google.com/group/ioio-users.
For more options, visit https://groups.google.com/d/optout.

Reply via email to