Hello Schnee, This is the motor I am using (http://www.pololu.com/product/114/specs). I'll try to lower the frequency!
And what do you mean " left out the capacitors for simplicity"? Thank you for your help! best regards Schnee 2014-05-25 12:13 GMT+08:00 <[email protected]>: > Hello Jack, > > I hope you had just left out the capacitors for simplicity. Otherwise I > definetly suggest to have them. > > Try to use a PWM frequency lower than 100kHz. Something like 30kHz is also > ok. > Try with a duty cycle lower than 100%, maybe 30% or 50% for the moment. > > It sounds a little bit as your power supply drops for a second, when you > try to start the motor. Maybe you > should think about connecting VM to the 9V directly. What type of motor > are you using? > > best regards > Schnee > > -- > You received this message because you are subscribed to the Google Groups > "ioio-users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/ioio-users. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
