IOIO newb, so I may have missed something obvious. I got my new IOIO-OTG and was glad to see that plugging it into a soldered together USB cable and spare 5V power source got me the happy red light without any serious solder burns. Then I wanted to make sure I was starting out with the latest firmware, so I successfully used the instructions for IOIODude <https://github.com/ytai/ioio/wiki/IOIO-OTG-Bootloader-and-IOIODude> app to update the firmware. (Side note: great instructional page, thank you!) Then I wanted to see that the update worked, so I tried to follow the part of the page "If you try this command when the IOIO is connected, but NOT in bootloader mode, and you are running the standard firmware, the output of this command will tell you which version of the application you have installed"
However, got stuck here. When I jump the boot pin to ground, then plug it in to my mac, it shows up as a "ls /dev/tty.usb*" device. When I *don't* put it in boot mode and plug it in, it still lights up... but never shows up as a tty device. Is it possible it has something to do with - the cable type? (I am guessing not because the firmware update worked... right?) - it needing external power to tell it to be in a certain device vs. host mode? (Didn't think this would matter with the switch set to 'A'uto). - Any other possibilities? -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
