This app is old. Try the prebuilt HelloIOIO apk from the latest software bundle. Also, remember to turn USB debugging OFF when using the IOIO. On Aug 12, 2014 1:45 PM, "Andrew Walbran" <[email protected]> wrote:
> Hello, > I just got my IOIO-OTG from Seeedstudio, and am trying to get it to work > with my Nexus 5. I have connected Vin to a 6 V lab power supply, and then > my Nexus 5 to the USB port via the included OSB-OTG adapter (on the IOIO > side) and a standard micro USB cable. The Nexus 5 shows that it is > charging, and USB debugging is connected. However, the IOIO Hardware Tester > app does not seem to detect the device; it still shows status as "Not > Connected". (The app is installed from the play store, > https://play.google.com/store/apps/details?id=ioio.example.ioiohardwaretester > .) > > Checking voltages with a multimeter, the 3.3 V rail is at 3.288 V, the 5 V > rail is at 5.004 V, and the power LED is on. The charge trimmer is turned > all the way up. Changing the host mode switch makes no difference. If I > disable USB debugging on the Nexus 5, then it shows up as a USB accessory, > but the hardware tester app still will not connect. > > What am I missing? > > -- > You received this message because you are subscribed to the Google Groups > "ioio-users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/ioio-users. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
