You must be looking at the wrong place. Next to where you downloaded the software bundle there's a QR code that you can click on our scan to download and use with IOIO manager. Were you following a different procedure? Were you trying to flash a new bootloader using a second IOIO or a programmer? On Oct 21, 2014 1:31 AM, "Ian Molesworth" <[email protected]> wrote:
> Hi Ytai > > Thanks for the reply. On the downloads page I don't see a version 5.0 that > will run against hardware SPKR0016 the only V5 software I see runs against > SPKR0020 to SPKR0030. > > I have a handful of Android phones going back to Android 2.3 the most > reliable device to connect to ioio boards is an old HTC desire. My Lenovo > tablet is a waste of time and my burner Sony experia E1 simply refuses to > connect although it can see and pair with the bluetooth. > > Back to the flashing. > > I am using the HTC ( android 2.3.3 ) with a cable connection to a > programmer ioio wired to my target ioio. I upgraded to app v4.00 but as I > mentioned I don't see a download on the page ( or in the GIT archive of all > versions ) that is compatible with my hardware. I did try to put the > SPKR0020 code into my 0016 hardware with predictable results ....... nada! > > > > -- > You received this message because you are subscribed to the Google Groups > "ioio-users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/ioio-users. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
