Thanks! its good enough for my project.
There is any distributor in Israel of this IOIO component? 
if the answer is no - this link is ok? (I saw a 2 types) 
http://www.seeedstudio.com/depot/IOIO-OTG-for-Android-p-1615.html 

בתאריך יום שלישי, 3 בפברואר 2015 בשעה 23:27:53 UTC+2, מאת Ytai:
>
> Do you have any specifications about the desired sample rate? number of 
> channels? voltage range? precision?
>
> The (stock) IOIO can do up to 16 concurrent channels at 1kHz each, 10-bit 
> resolution, where each channel is 0-3.3V. With some firmware tweaks you can 
> increase the sampling rate, and even more so if you're willing to trade-off 
> the number of channels. If you want different voltage levels, you'd need 
> some analog front-end. If you need higher resolution, you can use an 
> external ADC.
>
> In terms of software, you'd need to write a piece of Android software that 
> reads the (buffered) samples and draws them to the screen.
>
> What's you're describing has been done several times in the past. Some of 
> it might be open source. Google it.
>
> On Tue, Feb 3, 2015 at 11:17 AM, lilach azrad <[email protected] 
> <javascript:>> wrote:
>
>> My final project in my first degree of Software engineering is focused on 
>> making my Android smartphone to oscilloscope and I need DAQ component to 
>> achieve signals and show them on the Android smartphone. 
>> The minimal requirements are at least 2 analog input, ADC and a way to 
>> "transfer" the signals (via Bluetooh\usb)
>> Does the IOIO help me? if yes what should I implement on my software side.
>> Thanks,
>> Lilach
>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "ioio-users" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to [email protected] <javascript:>.
>> To post to this group, send email to [email protected] 
>> <javascript:>.
>> Visit this group at http://groups.google.com/group/ioio-users.
>> For more options, visit https://groups.google.com/d/optout.
>>
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"ioio-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send email to [email protected].
Visit this group at http://groups.google.com/group/ioio-users.
For more options, visit https://groups.google.com/d/optout.

Reply via email to