Are you sure your phone supports OpenAccessory? Is it on the supported devices page? https://github.com/ytai/ioio/wiki/Supported-Devices
On Mon, Mar 30, 2015 at 1:44 PM, <potte...@mymail.vcu.edu> wrote: > Power LED is on, and charging indicator is showing. No OpenAccessory > Dialog. > > On Monday, March 30, 2015 at 4:40:18 PM UTC-4, Ytai wrote: >> >> Let's take a few steps back. >> Turn USB debugging off on your phone, power the IOIO and connect it to >> the Android, with the "A" side of the cable on the IOIO side, the charge >> potentiometer on the IOIO fully clockwise and the host mode switch in the >> "A" position. >> >> - Is the IOIO power LED on? >> - Are you getting a charging indicator on the Android? >> - Are you getting the OpenAccessory dialog to show? >> >> >> On Mon, Mar 30, 2015 at 1:35 PM, <pott...@mymail.vcu.edu> wrote: >> >>> I turned debug off, I used a USB connection, then I did used the Android >>> Debug Bridge. Still nothing. Any other advice, or should I try to downgrade >>> the tablet? >>> >>> On Monday, March 30, 2015 at 4:08:12 PM UTC-4, Ytai wrote: >>>> >>>> Turn debugging OFF >>>> >>>> On Mon, Mar 30, 2015 at 1:06 PM, <pott...@mymail.vcu.edu> wrote: >>>> >>>>> OK, thanks so much for your help so far. I installed the precompiled >>>>> version onto the tablet, and it opens and runs. But the IOIO light won't >>>>> turn on. I verified the power supply, and made sure that debugging was >>>>> checked. Does anyone have experience with this tablet? >>>>> >>>>> >>>>> On Monday, March 30, 2015 at 3:53:36 PM UTC-4, Justin H wrote: >>>>>> >>>>>> Copy the .APK version on to your phone via USB connection. On >>>>>> settings, go to Security and find one that says "Unknown Sources". With >>>>>> the >>>>>> subheading of "Allow Installation of apps from unknown settings" --- >>>>>> These >>>>>> are what it says on my phone anyways. and make sure that is checked. Then >>>>>> go into a file manager on your phone and run/install the .APK file. This >>>>>> will rule out an issue from your compilation of the code vs. a problem >>>>>> with >>>>>> your phone setup. >>>>>> >>>>>> I had issues getting my devices to work, so I started with the .APKs >>>>>> turns out CyanogenMod 11 on my Galaxy Nexus wouldn't work, so I >>>>>> downgraded >>>>>> to CM10 and it started working. My Galaxy S5 required me to turn off USB >>>>>> debugging prior to connecting to the IOIO via USB. But demonstrating it >>>>>> is >>>>>> a problem with the device and not your compilation is the first step. >>>>>> >>>>>> On Monday, March 30, 2015 at 11:23:51 AM UTC-7, Lucas Potter wrote: >>>>>>> >>>>>>> I was working through this: https://www.sparkfun.com/tutorials/280 >>>>>>> >>>>>>> On Mon, Mar 30, 2015 at 2:02 PM, Ytai Ben-Tsvi <yta...@gmail.com> >>>>>>> wrote: >>>>>>> >>>>>>>> I don't know which steps you're talking about. >>>>>>>> HelloIOIO.apk is a precompiled app that you can directly install on >>>>>>>> the Android. It is in the software bundle. You don't need to compile it >>>>>>>> yourself. >>>>>>>> >>>>>>>> On Mon, Mar 30, 2015 at 10:59 AM, <pott...@mymail.vcu.edu> wrote: >>>>>>>> >>>>>>>>> I saw it just now- I'm working through the HelloIOIO.apk. >>>>>>>>> >>>>>>>>> At step 6, when I select add, a blank project selection screen >>>>>>>>> comes up. So I set both IOIOLibAndroid and IOIOBT at "Is Library" >>>>>>>>> >>>>>>>>> Then, when I'm modifying AndroidManifest.xml, after adding the >>>>>>>>> android.permission.INTERNET uses permission, I'm still getting error >>>>>>>>> flags. >>>>>>>>> >>>>>>>>> On Monday, March 30, 2015 at 1:17:14 PM UTC-4, Ytai wrote: >>>>>>>>>> >>>>>>>>>> Have you missed my reply? >>>>>>>>>> >>>>>>>>>> On Mon, Mar 30, 2015 at 10:05 AM, <pott...@mymail.vcu.edu> wrote: >>>>>>>>>> >>>>>>>>>>> My mistake, I meant error 601: No corresponding activity found. >>>>>>>>>>> >>>>>>>>>>> On Sunday, March 29, 2015 at 11:31:09 PM UTC-4, Ytai wrote: >>>>>>>>>>>> >>>>>>>>>>>> I suggest you start with the precompiled HelloIOIO.apk, just to >>>>>>>>>>>> verify that you have a functional setup. After that, if you're >>>>>>>>>>>> having >>>>>>>>>>>> trouble with AppInventor-related stuff, I suggest you contact the >>>>>>>>>>>> author of >>>>>>>>>>>> the page you linked to. It is not an official part of the IOIO >>>>>>>>>>>> codebase and >>>>>>>>>>>> I don't know how it works or what is error 631. >>>>>>>>>>>> >>>>>>>>>>>> On Sun, Mar 29, 2015 at 6:53 PM, <pott...@mymail.vcu.edu> >>>>>>>>>>>> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> Hey everyone. >>>>>>>>>>>>> >>>>>>>>>>>>> I'm trying to run IOIOsimpleLED < found here: >>>>>>>>>>>>> http://doc.inex.co.th/ioio-board-how-to-use-ioio-inventor/ >. >>>>>>>>>>>>> >>>>>>>>>>>>> I'm using an IOIO OTG (V4.01 bootloader and the V5.00 >>>>>>>>>>>>> application firmware) and a Samsung Galaxy Tab 4 (running 4.4.2), >>>>>>>>>>>>> with App >>>>>>>>>>>>> Inventor 2. I was getting a 631 error code, but now it just says >>>>>>>>>>>>> "Can't >>>>>>>>>>>>> connect with IOIO". USB debugging is deactivated. >>>>>>>>>>>>> >>>>>>>>>>>>> I also ran an OpenAccessory checker and it says that I need >>>>>>>>>>>>> version IOIO0200 or higher- but I'm not sure where to get the Open >>>>>>>>>>>>> accessory protocol. >>>>>>>>>>>>> >>>>>>>>>>>>> Thanks. >>>>>>>>>>>>> >>>>>>>>>>>>> -- >>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>> Google Groups "ioio-users" group. >>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>>> it, send an email to ioio-users+...@googlegroups.com. >>>>>>>>>>>>> To post to this group, send email to ioio-...@googlegroups.com >>>>>>>>>>>>> . >>>>>>>>>>>>> Visit this group at http://groups.google.com/group/ioio-users. >>>>>>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>> Google Groups "ioio-users" group. >>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>> it, send an email to ioio-users+...@googlegroups.com. >>>>>>>>>>> To post to this group, send email to ioio-...@googlegroups.com. >>>>>>>>>>> Visit this group at http://groups.google.com/group/ioio-users. >>>>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>> You received this message because you are subscribed to the Google >>>>>>>>> Groups "ioio-users" group. >>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>> send an email to ioio-users+...@googlegroups.com. >>>>>>>>> To post to this group, send email to ioio-...@googlegroups.com. >>>>>>>>> Visit this group at http://groups.google.com/group/ioio-users. >>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>>> >>>>>>>> >>>>>>>> -- >>>>>>>> You received this message because you are subscribed to the Google >>>>>>>> Groups "ioio-users" group. >>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>> send an email to ioio-users+...@googlegroups.com. >>>>>>>> To post to this group, send email to ioio-...@googlegroups.com. >>>>>>>> Visit this group at http://groups.google.com/group/ioio-users. >>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>> >>>>>>> >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> Lucas Potter >>>>>>> B.S. Biomedical Engineering >>>>>>> Virginia Commonwealth University, 2015 >>>>>>> >>>>>>> >>>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "ioio-users" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to ioio-users+...@googlegroups.com. >>>>> To post to this group, send email to ioio-...@googlegroups.com. >>>>> Visit this group at http://groups.google.com/group/ioio-users. >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>> >>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "ioio-users" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to ioio-users+...@googlegroups.com. >>> To post to this group, send email to ioio-...@googlegroups.com. >>> Visit this group at http://groups.google.com/group/ioio-users. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- > You received this message because you are subscribed to the Google Groups > "ioio-users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ioio-users+unsubscr...@googlegroups.com. > To post to this group, send email to ioio-users@googlegroups.com. > Visit this group at http://groups.google.com/group/ioio-users. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to ioio-users+unsubscr...@googlegroups.com. To post to this group, send email to ioio-users@googlegroups.com. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.