The lack of AOA support (if that is indeed the problem you're facing) is either a hardware or a software limitation of the device you're using. If you have a different Android device, you can check if the IOIO works with it in order to verify that the rest of the setup is good.
On Tue, Mar 31, 2015 at 8:25 AM, <[email protected]> wrote: > > > > No. No it is not. Is there any way to add OpenAccessory support? > > Thank you very much for your help thus far. > > On Tuesday, March 31, 2015 at 12:20:10 AM UTC-4, Ytai wrote: >> >> Are you sure your phone supports OpenAccessory? Is it on the supported >> devices page? >> https://github.com/ytai/ioio/wiki/Supported-Devices >> >> On Mon, Mar 30, 2015 at 1:44 PM, <[email protected]> wrote: >> >>> Power LED is on, and charging indicator is showing. No OpenAccessory >>> Dialog. >>> >>> On Monday, March 30, 2015 at 4:40:18 PM UTC-4, Ytai wrote: >>>> >>>> Let's take a few steps back. >>>> Turn USB debugging off on your phone, power the IOIO and connect it to >>>> the Android, with the "A" side of the cable on the IOIO side, the charge >>>> potentiometer on the IOIO fully clockwise and the host mode switch in the >>>> "A" position. >>>> >>>> - Is the IOIO power LED on? >>>> - Are you getting a charging indicator on the Android? >>>> - Are you getting the OpenAccessory dialog to show? >>>> >>>> >>>> On Mon, Mar 30, 2015 at 1:35 PM, <[email protected]> wrote: >>>> >>>>> I turned debug off, I used a USB connection, then I did used the >>>>> Android Debug Bridge. Still nothing. Any other advice, or should I try to >>>>> downgrade the tablet? >>>>> >>>>> On Monday, March 30, 2015 at 4:08:12 PM UTC-4, Ytai wrote: >>>>>> >>>>>> Turn debugging OFF >>>>>> >>>>>> On Mon, Mar 30, 2015 at 1:06 PM, <[email protected]> wrote: >>>>>> >>>>>>> OK, thanks so much for your help so far. I installed the precompiled >>>>>>> version onto the tablet, and it opens and runs. But the IOIO light won't >>>>>>> turn on. I verified the power supply, and made sure that debugging was >>>>>>> checked. Does anyone have experience with this tablet? >>>>>>> >>>>>>> >>>>>>> On Monday, March 30, 2015 at 3:53:36 PM UTC-4, Justin H wrote: >>>>>>>> >>>>>>>> Copy the .APK version on to your phone via USB connection. On >>>>>>>> settings, go to Security and find one that says "Unknown Sources". >>>>>>>> With the >>>>>>>> subheading of "Allow Installation of apps from unknown settings" --- >>>>>>>> These >>>>>>>> are what it says on my phone anyways. and make sure that is checked. >>>>>>>> Then >>>>>>>> go into a file manager on your phone and run/install the .APK file. >>>>>>>> This >>>>>>>> will rule out an issue from your compilation of the code vs. a problem >>>>>>>> with >>>>>>>> your phone setup. >>>>>>>> >>>>>>>> I had issues getting my devices to work, so I started with the >>>>>>>> .APKs turns out CyanogenMod 11 on my Galaxy Nexus wouldn't work, so I >>>>>>>> downgraded to CM10 and it started working. My Galaxy S5 required me to >>>>>>>> turn >>>>>>>> off USB debugging prior to connecting to the IOIO via USB. But >>>>>>>> demonstrating it is a problem with the device and not your compilation >>>>>>>> is >>>>>>>> the first step. >>>>>>>> >>>>>>>> On Monday, March 30, 2015 at 11:23:51 AM UTC-7, Lucas Potter wrote: >>>>>>>>> >>>>>>>>> I was working through this: https://www.sparkfun.com/tutorials/280 >>>>>>>>> >>>>>>>>> On Mon, Mar 30, 2015 at 2:02 PM, Ytai Ben-Tsvi <[email protected]> >>>>>>>>> wrote: >>>>>>>>> >>>>>>>>>> I don't know which steps you're talking about. >>>>>>>>>> HelloIOIO.apk is a precompiled app that you can directly install >>>>>>>>>> on the Android. It is in the software bundle. You don't need to >>>>>>>>>> compile it >>>>>>>>>> yourself. >>>>>>>>>> >>>>>>>>>> On Mon, Mar 30, 2015 at 10:59 AM, <[email protected]> wrote: >>>>>>>>>> >>>>>>>>>>> I saw it just now- I'm working through the HelloIOIO.apk. >>>>>>>>>>> >>>>>>>>>>> At step 6, when I select add, a blank project selection screen >>>>>>>>>>> comes up. So I set both IOIOLibAndroid and IOIOBT at "Is Library" >>>>>>>>>>> >>>>>>>>>>> Then, when I'm modifying AndroidManifest.xml, after adding the >>>>>>>>>>> android.permission.INTERNET uses permission, I'm still getting >>>>>>>>>>> error flags. >>>>>>>>>>> >>>>>>>>>>> On Monday, March 30, 2015 at 1:17:14 PM UTC-4, Ytai wrote: >>>>>>>>>>>> >>>>>>>>>>>> Have you missed my reply? >>>>>>>>>>>> >>>>>>>>>>>> On Mon, Mar 30, 2015 at 10:05 AM, <[email protected]> >>>>>>>>>>>> wrote: >>>>>>>>>>>> >>>>>>>>>>>>> My mistake, I meant error 601: No corresponding activity found. >>>>>>>>>>>>> >>>>>>>>>>>>> On Sunday, March 29, 2015 at 11:31:09 PM UTC-4, Ytai wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>> I suggest you start with the precompiled HelloIOIO.apk, just >>>>>>>>>>>>>> to verify that you have a functional setup. After that, if >>>>>>>>>>>>>> you're having >>>>>>>>>>>>>> trouble with AppInventor-related stuff, I suggest you contact >>>>>>>>>>>>>> the author of >>>>>>>>>>>>>> the page you linked to. It is not an official part of the IOIO >>>>>>>>>>>>>> codebase and >>>>>>>>>>>>>> I don't know how it works or what is error 631. >>>>>>>>>>>>>> >>>>>>>>>>>>>> On Sun, Mar 29, 2015 at 6:53 PM, <[email protected]> >>>>>>>>>>>>>> wrote: >>>>>>>>>>>>>> >>>>>>>>>>>>>>> Hey everyone. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I'm trying to run IOIOsimpleLED < found here: >>>>>>>>>>>>>>> http://doc.inex.co.th/ioio-board-how-to-use-ioio-inventor/ >>>>>>>>>>>>>>> >. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I'm using an IOIO OTG (V4.01 bootloader and the V5.00 >>>>>>>>>>>>>>> application firmware) and a Samsung Galaxy Tab 4 (running >>>>>>>>>>>>>>> 4.4.2), with App >>>>>>>>>>>>>>> Inventor 2. I was getting a 631 error code, but now it just >>>>>>>>>>>>>>> says "Can't >>>>>>>>>>>>>>> connect with IOIO". USB debugging is deactivated. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> I also ran an OpenAccessory checker and it says that I need >>>>>>>>>>>>>>> version IOIO0200 or higher- but I'm not sure where to get the >>>>>>>>>>>>>>> Open >>>>>>>>>>>>>>> accessory protocol. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> Thanks. >>>>>>>>>>>>>>> >>>>>>>>>>>>>>> -- >>>>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>>>> Google Groups "ioio-users" group. >>>>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails >>>>>>>>>>>>>>> from it, send an email to [email protected]. >>>>>>>>>>>>>>> To post to this group, send email to >>>>>>>>>>>>>>> [email protected]. >>>>>>>>>>>>>>> Visit this group at http://groups.google.com/group >>>>>>>>>>>>>>> /ioio-users. >>>>>>>>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>>>>>>>>> >>>>>>>>>>>>>> >>>>>>>>>>>>>> -- >>>>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>>>> Google Groups "ioio-users" group. >>>>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>>>> it, send an email to [email protected]. >>>>>>>>>>>>> To post to this group, send email to [email protected] >>>>>>>>>>>>> . >>>>>>>>>>>>> Visit this group at http://groups.google.com/group/ioio-users. >>>>>>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> -- >>>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>>> Google Groups "ioio-users" group. >>>>>>>>>>> To unsubscribe from this group and stop receiving emails from >>>>>>>>>>> it, send an email to [email protected]. >>>>>>>>>>> To post to this group, send email to [email protected]. >>>>>>>>>>> Visit this group at http://groups.google.com/group/ioio-users. >>>>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>>>>> >>>>>>>>>> >>>>>>>>>> -- >>>>>>>>>> You received this message because you are subscribed to the >>>>>>>>>> Google Groups "ioio-users" group. >>>>>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>>>>> send an email to [email protected]. >>>>>>>>>> To post to this group, send email to [email protected]. >>>>>>>>>> Visit this group at http://groups.google.com/group/ioio-users. >>>>>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> -- >>>>>>>>> Lucas Potter >>>>>>>>> B.S. Biomedical Engineering >>>>>>>>> Virginia Commonwealth University, 2015 >>>>>>>>> >>>>>>>>> >>>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "ioio-users" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to [email protected]. >>>>>>> To post to this group, send email to [email protected]. >>>>>>> Visit this group at http://groups.google.com/group/ioio-users. >>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>> >>>>>> >>>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "ioio-users" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to [email protected]. >>>>> To post to this group, send email to [email protected]. >>>>> Visit this group at http://groups.google.com/group/ioio-users. >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>> >>>> -- >>> You received this message because you are subscribed to the Google >>> Groups "ioio-users" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To post to this group, send email to [email protected]. >>> Visit this group at http://groups.google.com/group/ioio-users. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- > You received this message because you are subscribed to the Google Groups > "ioio-users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/ioio-users. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
