Seems like your voltage regulator is fried. Can you provide some details on what power supply you're using and how it was connected to the IOIO (i.e. length of wires, etc.)?
On Mon, May 18, 2015 at 3:28 AM, 'M. A.' via ioio-users < [email protected]> wrote: > Hello IOIO fans, > > I am using the IOIO OTG board since couple of weeks and everything seems > to be fine, but today I was working with it then I disconnected it from the > phone and the power source and connected it to another one, this is when it > stopped working, the pwr LED is not working anymore when I plug it to any > power supply. > > The host mode switch to "A" and the trim-pot is all the way clockwise. > When I connect it "only" to the phone it works perfectly fine! > > Any ideas how to fix the issue with the external power supply? > > Thanks > > -- > You received this message because you are subscribed to the Google Groups > "ioio-users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/ioio-users. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
