Hi, I may have corrupted my IOIO-OTG board, and I'm really struggling to recover it. With the switch in Accessory mode (towards the USB port), the PC does not recognize it as a serial port. I get Unknown Device, and I can't successfully apply the IOIO driver to it.
If I boot the IOIO with the boot pin grounded, it does show up as a serial port. Here's what it reads Hardware version: SPRK0020 Bootloader version: IOIO0400 Platform version: IOIO0030 I can use this interface to program IOIO App versions 330, 400, and 500. All seem to program successfully, but when I reboot with the boot pin disconnected, I don't see the board as a serial port. I tried two windows laptops and one mac. I AM able to get the Blink V3 application running on the board. Any help would be appreciated, thanks. -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
