1. This typically happens when something is wrong with your firmware bundle. Either it is corrupt, or non-existent or whatever.
2. Just power-cycle the IOIO. On Tue, Oct 27, 2015 at 4:00 AM, Byungha Choi <[email protected]> wrote: > I connect IOIO OTG board to PC and bootloader detected as below. > > > > ----------------------- > > IOIO Bootloader detected. > > Hardware version: SPRK0020 > Bootloader version: IOIO0400 > Platform version: IOIO0030 > ----------------------- > > > Then, I tried write new firmware on ioio, but failed like below output. > > > > " Caught IOException. Exting. " > > > > I don't know what is wrong now. > > And these are my questions,,, > > > 1. Could you let me know why this output comes? > > 2. How can I exit from bootloader mode to appicacion mode? (To check > application's current version) > > -- > You received this message because you are subscribed to the Google Groups > "ioio-users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/ioio-users. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
