Doesn't matter for programming. For debugging, you have to choose one during programming and only that one will work. On Nov 8, 2015 16:10, <[email protected]> wrote:
> When I use the Pickit3 it seems that there two choices of pins for the > serial input. Does it matter which pair that I use? BTW, the Pickit3 > works fine for me. You just have to be careful that all pins make good > contact. > > On Thursday, June 4, 2015 at 12:42:31 PM UTC-7, Ytai wrote: >> >> I don't know what that means, but at this point we're out of >> IOIO-specific-land, so I'd encourage you to read the PK3 docs or raise the >> matter on the relevant Microchip forum. >> FWIW, I can testify that it definitely *should* work and can also >> recommend that you consider using the bootloader instead. >> >> On Thu, Jun 4, 2015 at 12:39 PM, Dinesh Kumar <[email protected]> >> wrote: >> >>> First I tried to use PICKIT3 in Debugger mode to program IOIO-OTG.The >>> problem I faced is that PIC24FJ256GB206 is not available in Device >>> Selection list of PICKIT3 GUI.So I decided to use PICKIT3 in programmer >>> mode alone. >>> while programming IOIO-OTG to PICKIT3 (in programmer to go mode),PICKIT3 >>> shows some error. >>> Error message:status led blinks red in a pattern like 12 12 12 12...... >>> >>> can u pls explain source for the problem and solution to rectify it? >>> >>> On 5 June 2015 at 00:35, Ytai Ben-Tsvi <[email protected]> wrote: >>> >>>> That is untrue. I'm using PICKit3 to program the IOIOs all the time. >>>> >>>> On Thu, Jun 4, 2015 at 11:02 AM, Dinesh Kumar <[email protected]> >>>> wrote: >>>> >>>>> I read that it is possible to program IOIO-OTG using PICKIT 3.so I >>>>> tried it.while doing so, I faced the above problem. >>>>> PICKIT 3 does not have support for PIC24FJ256GB206..... >>>>> >>>>> >>>>> On 4 June 2015 at 22:44, Ytai Ben-Tsvi <[email protected]> wrote: >>>>> >>>>>> What is the problem you're facing? And why do you need to program it >>>>>> with a programmer as opposed to using the pre installed bootloader and >>>>>> programming over USB? >>>>>> On Jun 4, 2015 7:24 AM, "Dinesh Kumar" <[email protected]> >>>>>> wrote: >>>>>> >>>>>>> Hello., >>>>>>> I am trying to program IOIO-OTG(PIC24FJ256GB206) using PICKIT >>>>>>> 3.......But I can't........ >>>>>>> >>>>>>> Is there any solution or alternative way to program IOIO-OTG using >>>>>>> programmer????? >>>>>>> >>>>>>> -- >>>>>>> You received this message because you are subscribed to the Google >>>>>>> Groups "ioio-users" group. >>>>>>> To unsubscribe from this group and stop receiving emails from it, >>>>>>> send an email to [email protected]. >>>>>>> To post to this group, send email to [email protected]. >>>>>>> Visit this group at http://groups.google.com/group/ioio-users. >>>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>>> >>>>>> -- >>>>>> You received this message because you are subscribed to a topic in >>>>>> the Google Groups "ioio-users" group. >>>>>> To unsubscribe from this topic, visit >>>>>> https://groups.google.com/d/topic/ioio-users/pGF1Nv1hArA/unsubscribe. >>>>>> To unsubscribe from this group and all its topics, send an email to >>>>>> [email protected]. >>>>>> To post to this group, send email to [email protected]. >>>>>> Visit this group at http://groups.google.com/group/ioio-users. >>>>>> For more options, visit https://groups.google.com/d/optout. >>>>>> >>>>> >>>>> -- >>>>> You received this message because you are subscribed to the Google >>>>> Groups "ioio-users" group. >>>>> To unsubscribe from this group and stop receiving emails from it, send >>>>> an email to [email protected]. >>>>> To post to this group, send email to [email protected]. >>>>> Visit this group at http://groups.google.com/group/ioio-users. >>>>> For more options, visit https://groups.google.com/d/optout. >>>>> >>>> >>>> -- >>>> You received this message because you are subscribed to a topic in the >>>> Google Groups "ioio-users" group. >>>> To unsubscribe from this topic, visit >>>> https://groups.google.com/d/topic/ioio-users/pGF1Nv1hArA/unsubscribe. >>>> To unsubscribe from this group and all its topics, send an email to >>>> [email protected]. >>>> To post to this group, send email to [email protected]. >>>> Visit this group at http://groups.google.com/group/ioio-users. >>>> For more options, visit https://groups.google.com/d/optout. >>>> >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "ioio-users" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To post to this group, send email to [email protected]. >>> Visit this group at http://groups.google.com/group/ioio-users. >>> For more options, visit https://groups.google.com/d/optout. >>> >> >> -- > You received this message because you are subscribed to the Google Groups > "ioio-users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/ioio-users. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
