Wow! What a great community spirit! Thank you, Richard! On Feb 3, 2016 21:49, "Richard Wright" <[email protected]> wrote:
> I have created a generic web service for IOIO-OTG devices. It was created > back before the switch to Gradle, so all of the build stuff would need to > be re-done. I have never tested it, and thus I assume it won't work, on an > Android device, but it works great on Windows and Linux. I have even ran it > on Raspberry Pi, and Raspberry Pi 2. Basically, it has an embedded Tomcat > server running, and it makes available the 26 pins of the IOIO. It doesn't > support all modes, but basic digital in/out as well as analog inputs are > supported (I even think I made PWM work). > > It has 2 main parts. First, there is a configuration web-page, which > allows you to assign a name to each pin, and configure its mode (Digital > Input with Pull-Up, vs. Analog Input, etc). Then, there are simple URL's > that you can hit to either set the output data, or else read the state of > input pins. > > Thus, overall, it seems like it would do what you want, as long as you are > good using the IOIO-OTG together with Linux or Windows instead of Android. > > I have a crazy busy schedule this week and weekend, with some major > deadlines on Monday. But if this sounds like it would meet your needs, and > you don't urgently need it right now, then I can probably update the code > to be compatible with the Gradle build system by February 13th, and share a > new open source repository on GitHub. Let me know if that would be helpful > for you. > > On Wednesday, February 3, 2016 at 12:18:25 PM UTC-7, Ytai wrote: >> >> So it seems like you're talking about HTTP (or even more specifically, >> REST), not just WiFi. My answer was essentially how to forward the IOIO >> connection over TCP. >> I'm not aware of such an app, but I do remember that others have asked >> about this in the past, so you may want to dig the forum and see whether >> any of them has made any others and are willing to share their work. >> On Feb 2, 2016 1:26 PM, "Jabberwock" <[email protected]> wrote: >> >>> I am not sure I have understood you correctly... >>> >>> I was asking whether there is an app that would, e.g. run a webserver >>> and directed the calls to the connected IOIO board. For example, if the >>> phone address was 192.168.178.10, accessing >>> 192.168.178.10/DigitalWrite#4#On >>> <http://192.168.178.10/DigitalWrite#4%23On> would set the pin 4 of IOIO >>> connected to the phone to HIGH. So I am not sure what the second Android >>> device would be needed for... >>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "ioio-users" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to [email protected]. >>> To post to this group, send email to [email protected]. >>> Visit this group at https://groups.google.com/group/ioio-users. >>> For more options, visit https://groups.google.com/d/optout. >>> >> -- > You received this message because you are subscribed to the Google Groups > "ioio-users" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at https://groups.google.com/group/ioio-users. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
