Before when I connected the IOIO to my PC it would show up as connected to COM3. I was having some problems getting helloIOIO to work and tried to update the firmware.
To get into the proper mode I: -Disconnected IOIO -Shorted Boot pin to GND -Connected IOIO PC -Removed connection from boot to GND Then instead of the yellow light flashing 5 times it just flashed continuously. So I tried: -Disconnected IOIO -Shorted boot pin to GND -shorted pin 1 to GND -Connected IOIO to PC -Removed connection from boot to GND -Removed connection from pin 1 to GND (or left in connected, tried both ways) Now no yellow flashing light at all. I've tried -Disconnected IOIO -Shorted boot pin to GND -shorted pin 1 to GND -Connected IOIO to power supply -Remove connection from boot to GND -Removed connection from pin 1 to GND (or left in connected, tried both ways) -Connected IOIO to PC but it will not show up as connected to the computer so I can't flash the firmware. Any ideas? -- You received this message because you are subscribed to the Google Groups "ioio-users" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/ioio-users. For more options, visit https://groups.google.com/d/optout.
