Connected just to power I cannot get the led to fast blink, I've tried:
-Connecting it to power
-connecting boot to GND, connecting IOIO to power, removing connection from 
boot to GND
-Connecting boot to GND, connecting pin 1 to GND, connecting IOIO to power, 
removing connection from boot to GND, removing connection from pin 1 to GND

I tried with connecting the IOIO to a different port and with a different 
computer. No luck

On Sunday, 6 March 2016 22:15:55 UTC-5, Ytai wrote:
>
> If you're now connecting the IOIO just to power, are you getting the LED 
> to fast-blink?
> Also, did you try connecting to a different port / different computer?
>
> On Sun, Mar 6, 2016 at 6:59 PM, Kevin Chambers <[email protected] 
> <javascript:>> wrote:
>
>> Before when I connected the IOIO to my PC it would show up as connected 
>> to COM3. I was having some problems getting helloIOIO to work and tried to 
>> update the firmware.
>>
>> To get into the proper mode I:
>> -Disconnected IOIO
>> -Shorted Boot pin to GND
>> -Connected IOIO PC
>> -Removed connection from boot to GND
>>
>> Then instead of the yellow light flashing 5 times it just flashed 
>> continuously.
>>
>> So I tried:
>> -Disconnected IOIO
>> -Shorted boot pin to GND
>> -shorted pin 1 to GND
>> -Connected IOIO to PC
>> -Removed connection from boot to GND
>> -Removed connection from pin 1 to GND (or left in connected, tried both 
>> ways)
>>
>> Now no yellow flashing light at all.
>>
>> I've tried 
>> -Disconnected IOIO
>> -Shorted boot pin to GND
>> -shorted pin 1 to GND
>> -Connected IOIO to power supply
>> -Remove connection from boot to GND
>> -Removed connection from pin 1 to GND (or left in connected, tried both 
>> ways)
>> -Connected IOIO to PC
>>
>> but it will not show up as connected to the computer so I can't flash the 
>> firmware.
>>
>> Any ideas?
>>
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "ioio-users" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to [email protected] <javascript:>.
>> To post to this group, send email to [email protected] 
>> <javascript:>.
>> Visit this group at https://groups.google.com/group/ioio-users.
>> For more options, visit https://groups.google.com/d/optout.
>>
>
>

-- 
You received this message because you are subscribed to the Google Groups 
"ioio-users" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send email to [email protected].
Visit this group at https://groups.google.com/group/ioio-users.
For more options, visit https://groups.google.com/d/optout.

Reply via email to