On Mon, 2021-10-18 at 09:13 +0200, Dafna Hirschfeld wrote:
> 
> On 16.10.21 04:23, Yong Wu wrote:
> > On Mon, 2021-10-11 at 14:36 +0200, Dafna Hirschfeld wrote:
> > > 
> > > On 29.09.21 03:37, Yong Wu wrote:
> > > > MediaTek IOMMU-SMI diagram is like below. all the consumer
> > > > connect
> > > > with
> > > > smi-larb, then connect with smi-common.
> > > > 
> > > >           M4U
> > > >            |
> > > >       smi-common
> > > >            |
> > > >     -------------
> > > >     |         |    ...
> > > >     |         |
> > > > larb1     larb2
> > > >     |         |
> > > > vdec       venc
> > > > 
> > > > When the consumer works, it should enable the smi-larb's power
> > > > which
> > > > also need enable the smi-common's power firstly.
> > > > 
> > > > Thus, First of all, use the device link connect the consumer
> > > > and
> > > > the
> > > > smi-larbs. then add device link between the smi-larb and smi-
> > > > common.
> > > > 
> > > > This patch adds device_link between the consumer and the larbs.
> > > > 
> > > > When device_link_add, I add the flag DL_FLAG_STATELESS to avoid
> > > > calling
> > > > pm_runtime_xx to keep the original status of clocks. It can
> > > > avoid
> > > > two
> > > > issues:
> > > > 1) Display HW show fastlogo abnormally reported in [1]. At the
> > > > beggining,
> > > > all the clocks are enabled before entering kernel, but the
> > > > clocks
> > > > for
> > > > display HW(always in larb0) will be gated after clk_enable and
> > > > clk_disable
> > > > called from device_link_add(->pm_runtime_resume) and rpm_idle.
> > > > The
> > > > clock
> > > > operation happened before display driver probe. At that time,
> > > > the
> > > > display
> > > > HW will be abnormal.
> > > > 
> > > > 2) A deadlock issue reported in [2]. Use DL_FLAG_STATELESS to
> > > > skip
> > > > pm_runtime_xx to avoid the deadlock.
> > > > 
> > > > Corresponding, DL_FLAG_AUTOREMOVE_CONSUMER can't be added, then
> > > > device_link_removed should be added explicitly.
> > > > 
> > > > [1]
> > > > 
https://lore.kernel.org/linux-mediatek/1564213888.22908.4.camel@mhfsdcap03/
> > > > [2] https://lore.kernel.org/patchwork/patch/1086569/
> > > > 
> > > > Suggested-by: Tomasz Figa <tf...@chromium.org>
> > > > Signed-off-by: Yong Wu <yong...@mediatek.com>
> > > > Tested-by: Frank Wunderlich <fran...@public-files.de> # BPI-
> > > > R2/MT7623
> > > > ---
> > > >    drivers/iommu/mtk_iommu.c    | 22 ++++++++++++++++++++++
> > > >    drivers/iommu/mtk_iommu_v1.c | 20 +++++++++++++++++++-
> > > >    2 files changed, 41 insertions(+), 1 deletion(-)
> > > > 
> > > > diff --git a/drivers/iommu/mtk_iommu.c
> > > > b/drivers/iommu/mtk_iommu.c
> > > > index d5848f78a677..a2fa55899434 100644
> > > > --- a/drivers/iommu/mtk_iommu.c
> > > > +++ b/drivers/iommu/mtk_iommu.c
> > > > @@ -560,22 +560,44 @@ static struct iommu_device
> > > > *mtk_iommu_probe_device(struct device *dev)
> > > >    {
> > > >         struct iommu_fwspec *fwspec =
> > > > dev_iommu_fwspec_get(dev);
> > > >         struct mtk_iommu_data *data;
> > > > +       struct device_link *link;
> > > > +       struct device *larbdev;
> > > > +       unsigned int larbid;
> > > >    
> > > >         if (!fwspec || fwspec->ops != &mtk_iommu_ops)
> > > >                 return ERR_PTR(-ENODEV); /* Not a iommu client
> > > > device
> > > > */
> > > >    
> > > >         data = dev_iommu_priv_get(dev);
> > > >    
> > > > +       /*
> > > > +        * Link the consumer device with the smi-larb
> > > > device(supplier)
> > > > +        * The device in each a larb is a independent HW. thus
> > > > only
> > > > link
> > > > +        * one larb here.
> > > > +        */
> > > > +       larbid = MTK_M4U_TO_LARB(fwspec->ids[0]);
> > > 
> > > so larbid is always the same for all the ids of a device?
> > 
> > Yes. For me, each a dtsi node should represent a HW unit which can
> > only
> > connect one larb.
> > 
> > > If so maybe it worth testing it and return error if this is not
> > > the
> > > case.
> > 
> > Thanks for the suggestion. This is very helpful. I did see someone
> > put
> > the different larbs in one node. I will check this, and add return
> 
> I am working on bugs found on media drivers, could you please point
> me to
> that wrong node?
> Will you send a fix to that node in the dtsi?

sorry. I mean it happened in the internal branch and it has already
been fixed internally,  all the upstream nodes are ok for this.

Thanks
> 
> 
> Thanks,
> Dafna
> 
> > EINVAL for this case.
> 
> 
> 
> > 
> > > 
> > > Thanks,
> > > Dafna
> > 
> >   
> > > > 
_______________________________________________
iommu mailing list
iommu@lists.linux-foundation.org
https://lists.linuxfoundation.org/mailman/listinfo/iommu

Reply via email to