To all,
I have to agree with Thiago. If this is not standards based work then this is 
an iotivity activity. If it is an iotivity activity, the discussion needs to 
happen on the mailing list and captured decisions including design need to be 
posted to the wiki.
Thiago,
What we lack though is a way for the community to say ?yes let?s do it? or 
indicate ?we approve?.
Pat

From: iotivity-dev-bounces at lists.iotivity.org 
[mailto:[email protected]] On Behalf Of ???
Sent: Thursday, July 23, 2015 3:41 AM
To: Macieira, Thiago; iotivity-dev at lists.iotivity.org
Subject: Re: [dev] CAGetNetworkInformation() function does not work


Thiago,

Please check the following URLs before understanding what Routing Manger does :

https://wiki.iotivity.org/routing_through_heterogeneous_transports

Its not for IPV6 .ts for heterogeneous transports.( like IPV4, BT , BLE)



And, followings are comments :



"This feature has never been described and its needs are not understood. As far 
as I can tell, it's not part of the
spec, in any version I've seen. We're asking that you share this information
so we can come up with a proper, long-term solution."
>> Please attend the dc tg cc's before saying never been described. we 
>> communicated

      many times in the cc. we are planning to propose it in Spec C as spec A 
and spec B timelines are freezed .



"IoTivity has no bi-weekly calls or any call at any frequency. If you're
meeting outside of IoTivity, please post any conclusions to the mailing list."

>> Discovery & Connectivity task group has its bi-weekly calls.

      We are attending the dc tg calls from long.

      If you are not aware, please check with Pat.

      Already dc tg maintainer posts the MoM.



Thanks.

Best Regards,

---

MyeongGi Jeong

Senior Engineer, Software Architect

Software R&D Center, Samsung Electronics Co., Ltd.

+82-10-3328-1130







------- Original Message -------

Sender : Thiago Macieira<thiago.macieira at intel.com<mailto:thiago.macieira at 
intel.com>>

Date : 2015-07-23 00:48 (GMT+09:00)

Title : Re: [dev] CAGetNetworkInformation() function does not work


On Wednesday 22 July 2015 05:05:22 ??? wrote:
> We are not sure why you are saying unwise and unnecessary.
> It??s up to the API user to use any internal APIs.
> Currently Routing manager requires the GertNetworkInformation to know the
> available networks and route the packet.

Can you describe why the code requires the information in order to do routing?
The operating system already has the routing tables and knows the routes and
IP addresses better than we do. Therefore, the operating system already does
routing better than we can in IoTivity.

So why do we need to do routing at all? This feature has never been described
and its needs are not understood. As far as I can tell, it's not part of the
spec, in any version I've seen. We're asking that you share this information
so we can come up with a proper, long-term solution.

> The main subject of the mail is
> because of your changes, this API is not working.

The API might be flawed. We need to establish whether it makes sense before we
go back to inserting code to support it.

> Only Application devlopers required to use C or C++ APIs.
> Any feature contributors can use internal APIs and any feature can have unit
> test cases and samples to make sure all units are functional. If you feel
> an internal API is unnecessary, please raise the issue during the biweekly
> CC or through the dev-mailing list before you changes.

IoTivity has no bi-weekly calls or any call at any frequency. If you're
meeting outside of IoTivity, please post any conclusions to the mailing list.

You're right that IoTivity features can use the internal API. But the IoTivity
feature itself needs to be unit-tested so we can catch the breakage when the
changes are done. I'd like us to investigate why the failure was allowed to
happen in the first place.

--
Thiago Macieira - thiago.macieira (AT) intel.com
  Software Architect - Intel Open Source Technology Center

_______________________________________________
iotivity-dev mailing list
iotivity-dev at lists.iotivity.org<mailto:iotivity-dev at lists.iotivity.org>
https://lists.iotivity.org/mailman/listinfo/iotivity-dev

[cid:image001.gif at 01D0C538.13489A30]

[http://ext.samsung.net/mailcheck/SeenTimeChecker?do=0fa18573320d6211ce680a47a6c1c34e58ef0e8a7653647a032aa89e99be1a3e13d69ea60670f66e1fac5bf6c61543587bc8a6096cfbfc9f02e038c8d853bffbdb9fdddda33e82cbe4a391424e62fcf6cf878f9a26ce15a0]
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://lists.iotivity.org/pipermail/iotivity-dev/attachments/20150723/ccedf849/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.gif
Type: image/gif
Size: 13168 bytes
Desc: image001.gif
URL: 
<http://lists.iotivity.org/pipermail/iotivity-dev/attachments/20150723/ccedf849/attachment.gif>

Reply via email to