Dear IOTivity, we are facing issues with IP communication on Arduino AT Mega 2560 and Arduino Ethernet shield with the build versions( latest pulled from gerrit, 1.1.1, 1.1.0 and 1.0.1. )
So with the above build we cannot see any logs in the Arduino server except for "ocserver is starting". Please let us know as to which build should be used for Arduino Mega 2560 with Ethernet shield communication and Android as client ? Also please let us know if the Android device and the Arduino At Mega with Ethernet shield be connected to the same WiFi network / IP ? Are there any key steps that we need to take care while we communicate the Android with Ethernet shield on At Mega 2560 board ? Thanks -Rangaraju ________________________________ This message is for the designated recipient only and may contain privileged, proprietary, or otherwise confidential information. If you have received it in error, please notify the sender immediately and delete the original. Any other use of the e-mail by you is prohibited. Where allowed by local law, electronic communications with Accenture and its affiliates, including e-mail and instant messaging (including content), may be scanned by our systems for the purposes of information security and assessment of internal compliance with Accenture policy. ______________________________________________________________________________________ www.accenture.com -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.iotivity.org/pipermail/iotivity-dev/attachments/20160909/a769a20b/attachment.html>
