Hi Philippe, Thanks a lot for your reply ?
It looks like there?s some problem with the logs on Arduino AT Mega since it just stops showing after few mins and also we are facing some issues with connecting it our company?s LAN since it looks like it has some restrictions and its blocking the IP from Arduino, so we have procured a WIFI shield (SparkFun WiFi Shield - ESP8266) and we are planning to connect both the Arduino MEGA 2560 and the Android device ( Samsung 5) to WIFI hotspot (from our phone). So will the Arduino MEGA 2560 with the Android device to WIFI hotspot work on IOTivity 1.1.0 and 1.1.1 ( unicast communication ). Thanks -Rangaraju From: Philippe Coval [mailto:[email protected]] Sent: Friday, September 09, 2016 9:14 PM To: Devaraju, Rangaraju <rangaraju.devaraju at accenture.com> Cc: iotivity-dev <iotivity-dev at lists.iotivity.org>; Light, John J <john.j.light at intel.com>; Nr, Vikas <vikas.nr at accenture.com> Subject: Re: [dev] IOTivity with Arduino + Ethernet Shield + Android issue !! On Fri, Sep 9, 2016 at 1:38 PM, <rangaraju.devaraju at accenture.com<mailto:rangaraju.devaraju at accenture.com>> wrote: Dear IOTivity, we are facing issues with IP communication on Arduino AT Mega 2560 and Arduino Ethernet shield with the build versions( latest pulled from gerrit, 1.1.1, 1.1.0 and 1.0.1. ) So with the above build we cannot see any logs in the Arduino server except for "ocserver is starting". Please let us know as to which build should be used for Arduino Mega 2560 with Ethernet shield communication and Android as client ? Hi, With someone reading this list I've been successfully tested iotivity on arduino mega on version 1.1.0, 1.1.1 and I need to try master again but it builds fine at least ... But I don't have the device now, but I am ready to help you remotely if possible. The first thing that comes to my mind, is have you setup correctly the mac address of your ethernet shield in the code? Can you ping it ? wireshark can help to see what is going on too. Good luck -- https://wiki.tizen.org/wiki/User:Pcoval<https://urldefense.proofpoint.com/v2/url?u=https-3A__wiki.tizen.org_wiki_User-3APcoval&d=DQMFaQ&c=eIGjsITfXP_y-DLLX0uEHXJvU8nOHrUK8IrwNKOtkVU&r=7tMYnbONFLykRciNgwFIf75AXAw25ZLCc6RZRcjDEK4&m=ynplUcUGG8nYOgmeYbdqHLrjPjxOrF4deM62OKU8tHs&s=0GRGMedAvjID1ixLA-1il3DCb4B2sW6IVnzIAEaU_EY&e=> ________________________________ This message is for the designated recipient only and may contain privileged, proprietary, or otherwise confidential information. If you have received it in error, please notify the sender immediately and delete the original. Any other use of the e-mail by you is prohibited. Where allowed by local law, electronic communications with Accenture and its affiliates, including e-mail and instant messaging (including content), may be scanned by our systems for the purposes of information security and assessment of internal compliance with Accenture policy. ______________________________________________________________________________________ www.accenture.com -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.iotivity.org/pipermail/iotivity-dev/attachments/20160910/3929a84b/attachment.html>
