On Fri, 26 Apr 2002 09:36:55 +0800
Jimmy <[EMAIL PROTECTED]> wrote:

> Hi, 
> I'm using FreeBSD-4.5-STABLE and I have 4 interfaces on it 
> 
>       fxp0 -> localnet (192.168.100.0/24) (nat)
>       xl0 -> external interface
>       xl1 -> localnet (192.168.200.0/24 (nat)
>         xl2 -> bridge with xl0
> 
> My concerned is, if I enable the bridge in xl2 (net.link.ether.bridge_cfg: 
>xl0:0,xl2:0) my localnet work (192.168.100.0/24 and 192.168.200/24) cannot connect 
>with hosts connected to xl2.  I've search google and the archive but I don't see the 
>solution there. 
> 
> Thanks in advance,
> 
> Jimmy

Let me revise my question, I'm using FreeBSD-4.5-STABLE with ipf and ipfw (ipf for nat 
and packet filter & ipfw for traffic shaping)

/etc/ipnat.rule
---------------map xl0 192.168.100.0/24 -> 203.167.87.59/32 portmap tcp/udp 40000:60000
map xl0 192.168.100.0/24 -> xxx.xxx.xxx.xxx/32
map xl0 192.168.100.0/24 -> xxx.xxx.xxx.xxx/32 proxy port ftp ftp/tcp 
map xl0 192.168.100.105/32 -> xxx.xxx.xxx.xxx/32 proxy port ftp ftp/tcp
rdr fxp0 0.0.0.0/0.0.0.0 port 80 -> 127.0.0.1 port 8888
map xl0 192.168.200.0/24 -> xxx.xxx.xxx.xxx/32 portmap tcp/udp 40000:60000
map xl0 192.168.200.0/24 -> xxx.xxx.xxx.xxx/32
rdr xl1 0.0.0.0/0.0.0.0 port 80 -> 127.0.0.1 port 8888

my ipnat is working fine but if I put an external host in my filter bridge nic (xl2) 
the localnet can't connect to the host connected on the filter bridge.

does ipfilter/ipnat doesn't support yet this kind of setup? or I'm I missing something 
with my ipnat/ipf rules?

TIA,

Jimmy

Reply via email to