You never seem to get good response on this list to bridge questions. --I never have anyway. I don't think many people are using it as a bridge and it isn't documented very well either. I am using it to protect about 900 workstations and 100 servers with a 140 line ruleset. I have never seen it stop firewalling but we have had a lot of troubles with the state table filling up. Finally we setup a machine with a state table in the 90k states neighborhood and since then haven't seen much trouble. Granted since I have never noticed it not firewalling I have never checked much for it either. I just assume it works. How did you discover this?
One thing we do have troubles with -- just this morning in fact, is workstations are not able to web browse out. It happens every so often. ipfstat doesn't show anything out of the ordinary. What is STP? Currently I have the firewall email me the ruleset every midnight and I try to keep it up to date every so often on a backup machine that is running but the bridge net cards are not plugged into the net. When the firewalling stops, what do the ipfstat numbers look like? --ja On Thu, 31 Oct 2002, Sonja Appelman wrote: > Hi, > > I've been running an OpenBSD 2.9 firewalling bridge using IPF for more > than a year very successfully. I've been most pleased. But just recently out of > the blue, the bridge started letting ALL traffic through! I immediately > rebooted the machine and everything went back to normal, i.e. it started > blocking again. But after a few days the same occured, it started letting > all traffic through. Needless to say I've switched the machine off for > now. > > It was running in unison with another OpenBSD 2.9 firewalling bridge, same > hardware specs, same ipf rules, etc. I've been using STP to keep the > Master/Slave relationship in check. Each machine has 3 interface cards. 2 > for the bridging and the third interface for simply copying the ipf > ruleset from the master to the slave via a cross-over cable. > > Does anyone out there have any clue as to what went wrong? > > Thanks for any help you can give. > > Herman > :) > > > --
