On Thu, Jan 23, 2003 at 01:53:41PM -0500, Vedran Bender wrote:
> > Think about it from a routing perspective. How would a packet with a
> > destination address of 10.x.x.x (pre-NAT) reach your firewall? Does
> > some external host or router have a default route pointing at its
> > outside interface? Logically, there is no reason packets with an
> > invalid pre-NAT destination address should ever reach you in the
> > first place.
> 
> Yes, and logically speaking, that makes sense.  However, if I were a
> potential attacker, one of the very first things I would do is spoof a
> packet to make it look like it's coming from 10.x.x.x network, since I know
> that many people run the 10.x.x.x scheme for their internal networks.  So it
> is a valid concern.  Actually, in firewalling terminology, this concept is
> known as "configuring spoofing on the interfaces".  A good firewall ruleset
> should have these rules.

We're actually discussing destination addressing, not source. You
would likely have to employ techniques like source-routing or be directly
connected to the firewall's external LAN in order to successfully
deliver a packet addressed to a 10.x.x.x address in most cases.

-c

Reply via email to