On Thu, 23 Jan 2003 09:09:23 -0800
Clayton Fiske <[EMAIL PROTECTED]> wrote:

> On Thu, Jan 23, 2003 at 08:55:28AM +0100, Remco Post wrote:
> > On Wed, 22 Jan 2003 16:31:48 -0800
> > Clayton Fiske <[EMAIL PROTECTED]> wrote:
> > 
> > > Unauthorized inbound traffic would have a -source- of 10.x.x.x
> > > coming in, whereas valid traffic would have a -destination- of
> > > 10.x.x.x.
> > 
> > after NAT this is correct, before NAT, one would maybe like to block
> > all traffic with a destination of 10.0.0.0/8, sice that cannot
> > excist on that network. This sort of sounds like a shortcoming of
> > ipfilter....
> 
> Think about it from a routing perspective. How would a packet with a
> destination address of 10.x.x.x (pre-NAT) reach your firewall? Does
> some external host or router have a default route pointing at its
> outside interface? Logically, there is no reason packets with an
> invalid pre-NAT destination address should ever reach you in the
> first place.
> 

source routing is one option, misconfiguration of the network outside is
another. I've lived on campus with 2000 students on a big switched
network, inmagine the possebilities. Ever looked at the log of a
firewall on a cable network. If I ever bother to look, auch...

> If you are really worried about this, set up a rdr rule that takes
> inbound traffic addressed to 10.x.x.x and rdr's it to some bogus
> address for which you have filter rules.
> 

hmmm, intresting idea...

> -c
> 

-- 

Remco

Reply via email to